Search results for query: *

Hi, PFMD is on the protected part of the FMD, and is automatically generated when upgrading to Rls 7.6 as part of the quality strengthening of the CS. It's not only used for geographic redundancy, you can use it to send the backup to a remote FTP server on a weekly basis so you can have 10...

If you restart a phone in your HQ, does it encounter the same problem? Are you sure that all remote locations and the HQ has the same S1 and S2 address? I see you mention you have SRG's and SMG locations, and those locations should use different S1 addresses to better support survivability. If...

Yeah, the msec is a common problem. I always set MSNV on the ipti members for the virtual trunk, that way we can have msbt on the sets for internal communication, rather than turn it off as default in the parm settings. But everyone has probably their own opinion on this as the MSEC is there for...

As a starter you can check the ip-routing/fw from the T-Lan DSP ip-adresses on the E's towards LYNC. I2007

Hi, You are right that there are some expensive third party applications out the there, but they can normally do more than just sending a single message to a single phone. That being said, I had to write my own application (about 16 hours spent on the development) to do some tests around a...

Hi, Just make sure you have the latest loadware installed on the UDT card. There are a lot of fixes during the last 2 years on those cards, and new cards are shipped with older loadwares. LD60 .ver <loop> (it has to be enabled) The latest loadware should be udtcab17 I think. I2007

Hi, Etown, one question popped into my mind reading your comments. Did avaya recommend you to swap the CPPM cards, but they did not provide you with information on how to do it? For the comment about not being able to buy CPPM's anymore, what about the call server? Are we not able to buy a new...

First of all Firefox should never be used with UCM at all as only IE is supported. That being said, if you have a newer version of IE be sure to run the site in compatibility view. You can make sure to always use compatibility view by going to: Tools --> compatibility view settings and check...

Just upgrade to the latest IP phone firmware on the TPS via Element manager. If that doesn't work you can always revert back to the previous software. I think you can download the software from the Avaya support site without logging in? You didn't mention what software the CS was running (as I...

You have a command in the SS called "timaadj". This is a script made by Avaya to adjust timedrift on servers not being able to sync to NTP. If you use this command timeadj with the correction value of -60 would add 1 minute making the clock going faster every day. Setting it to 60 would slow...

Yes, as long as you put in the latest GA 82.022 on the OAI and the latest Handset software as well you should have supported solution. It's working as a charm for me. What you should look more into is the 2245 SVP controllers if you use that. Those have to be on the latest software and you also...

Normally, if you are reinstalling using the instructions in the NTP, a reformat of the HD is a part of the routine. However, you will get a question if you want to reformat the admin partition in which to answer yes. If you absolutely want to be on the safe side, find a laptop with IDE 2,5"...

You should start looking for a BERR (BusError) in the history files. To further understand the message you need to take out the ras stack of the message in PDT, but that's something you normally need an Avaya distributor/partner to do. I2007

Sounds more like a watchdog reset. Do you see any messages in /var/log/nortel/ss_common.log or /var/log/nortel/linuxbase.log on one of the signaling servers indicating what the problem might be. I2007

Hi. FYI, if this is a CPMG CoRes system it could also be a fault with the sw delivered with the card itself. You then need to upgrade the card with a cpmg.bin file you can receive from Avaya support. The procedure is defined in a bulletin. Before you upgrade the CPMG card, you will never be...

Hi. There is a tool, but it's far from self explanatory, and it's difficult to handle. It's not TM, but they reuse some of the components in TM to generate and regenerate csv files to be used in SubManager. I think it's called ConversionTool. I2007

If the cores are joined you can split them without service outage. Then you can power down the inactive and move it to another location without service outage. After the move and after you have reconnected your E-Lan and HSP you can power on and join them again without any service outage. This...

Is this a HA system. If so it goes into split mode prior to the INI. You could also print out the ras stack to see if it's a "manual" ini that someone has entered in pdt... I2007

Know I see you posted your question in June. Thought this would be a more busy forum.... Btw, did you find out any solution to your problem...? // Thomas

We had some issues with .NET hotfixes from Microsoft. We had to uninstall MCM, deregister OCS-Proxyserver, uninstall OCS-Proxyserver, uninstall .NET hotfixes and then reinstall everything again. Takes about 60 minutes, if you know what you are doing. Otherwise, if you can't register the MCM...