Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Latest activity
-
SЯ ищу прошивку для Panasonic KX-NT546, а именно версию 1 (v1). Мне нужна версия прошивки выше 01.010, так как обновление до 02.001...
-
masviss replied to the thread ISDN Phone.For example ADD-SBCSU:11200,FBUS,DIR,1-21-2-0,SET600&DTE,3,3,2,2,1,1,0,0,N,0,0,,,SBDSS1,,SBDSS1,Y,Y,0,,,,,Y,N,N,,5,0...
-
RioGrande75 replied to the thread ISDN Phone.STMD module was mainly used for ISDN trunks but can be configured for non-buspowered phones too. As there were not many pure isdn phones...
-
TouchToneTommy replied to the thread Relay Pulse Issue.I think you need to create a short code on the system where the phone is located (Server Edition Primary?), have it dial the Relay Short...
-
Bballewj replied to the thread call pilot aa.thanks , i will try that the next time im out there appreicate it
-
Bballewj replied to the thread call pilot aa.
-
BThe auto attendant is answering the line here. Should'nt the CCR tree answer, where is that manual?
-
BI believe this can be done through the phone, feature 983, can't hurt to try.
-
lastation4 replied to the thread DCH lamp showing Yellow.Relevant Cisco Configs: network-clock-participate wic 0 voice-card 0 ! ! ! voice service pots controller T1 0/0/0 cablelength short...
-
lastation4 replied to the thread DCH lamp showing Yellow.This is all well and good, but this is not a PRI2 card. I need a T1 not an E1 interface. None of these configs are clearing the yellow...
-
ККонстантин reacted to Medone's post in the thread Looking to download DERT for HFA 15 V3 R0.40.0 C1 with
Like.
Hello sbcsu You mean that i can use V1 R0.5.0 and upload the IOS image to the phone ? Wouldn't it make any damge to the phone ? Regards . -
Hi, You may want to have a look at the BOUNDCOLUMN property of your combobox and set it to 2 to return the value of column 2... -
strongm replied to the thread copy and paste picture box.> I don't like the use of flexgrid It's the MSHFlexgrid, which is a slightly later contyrol - but why don't you like it? For this... -
Qzwsa replied to the thread call pilot aa.Changing the CCR tree on a Call Pilot can be done without disable/re-enable, that was required for the Flash and NAM voicemails. Make...
