Search results for query: *

Make sure you are using the Wildix SIP/VoIP password, not the collaboration password. (The SIP/VoIP password is the bottom password when you select 'Set Passwords')

Goto settings - bluetooth on iphone click on Mitel 6940 bluetooth connection and turn slider on for contacts

Routing will be the same

You can record a temporary greeting using admin mailbox TUI or upload one in System Audio Source Update folder using web GUI. You cannot schedule it but on the day you want the temporary greeting to start, log into the admin mailbox TUI and specify how many days you want the temporary greeting...

What type of system? (MXe, CX or AX) MXe = 30 VM ports CX = 4 or 16 VM ports AX = 20 VM ports

Check your offline configuration: Select your outbound pager dialer line group Select the Dialers (Pagers) tab Make sure your 0 - Internal and 1 - External are checked Even though they are created, they still have to be checked off in the line group

Create temporary extensions on the new cards then do a "phone swap": To complete a “phone swap” · Identify the two extensions · Close Session DB Manager (the administration software installed on your PC cannot be running) · On an admin phone, dial feature 9932 (default on US systems)...

ONS Ring Groups Programming In CDE Form 04, enable Feature Level 3 or greater in System Option 102. For the Primary (Master) Telephone - ONS or DNIC In CDE Form 09, program the primary (ONS or DNIC) telephone. Make the prime line the preferred line. Ensure that the primary telephone has no...

It was most likely installed in the 1980s. Most of the techs who worked on these are probably dead by now :)

Probably just had an answer DN of 234 on 227

I came across the same issue with a customer today. Found that if the user has their status set to an option where the softphone is unchecked, then you will not get the answer button on the smartphone app. eg. If their status is set to "In the Office" and their desk phone is checked but the soft...

Found it! (in Avaya Business Communications Manager 6.0 Configuration — Devices Manual) Maximum 50 digital phones or maximum 60 IP phones

Limit on MICS is 50. Can't find any info on the limit for the BCM 450 (don't know if the same limit was passed to the BCM)

What is the maximum number of phones allowed in a single page zone on a BCM 450?

If you're changing the number using the TUI then to do a link you have to enter #52 then the phone number # = next character is going to be a "special" character 5 = enters a # 2 = resume adding digits to the destination phone number

Either the SIP password is the same as the extension number or blank (new alarm in 6.2)

From the 5000 help file: Hot Desking currently does not work across multiple nodes.

My guess would be to setup ARS (using 92000)to insert a 9 before all outgoing calls and setup a separate key that dials 92001 or change 92001 to a single digit like 7 and use this code for department calls. For outside and long distance calls they dial 8 and xxx-xxxx for local or 8 and...

Could be a bad voice mail port. Call each port and see if they are all working.

You checked the room in, but did not check the mailbox in (needs to be done from the front desk mailbox) If they have PMS software then it will do both automatically, if not then you have to manually do both separately