sx200 5.0 customer wants analog ext to ring when IP ext is called

[Crowtalks]

I have a customer that wants an analog extension to ring when an IP extension rings...

I have a Dees Stinger ringer hooked to an analog extension and the customer wants that ringer to ring whenever extension 1235 is called.

what is the best way to acheive this?

Jim

"If I had known it would turn out like this, I would have become a locksmith" Albert Einstein

NCSS, NCTS, NCTE, CS1000E, Call Pilot
Avaya IP Office
Mitel 3300 Advanced, 5000, SX200, NuPoint, MiCollab, MBG

 

[lowradiation]

ONS Ring Groups
Programming
In CDE Form 04, enable Feature Level 3 or greater in System Option 102.
For the Primary (Master) Telephone - ONS or DNIC
In CDE Form 09, program the primary (ONS or DNIC) telephone. Make the prime line the preferred line. Ensure that the primary telephone has no key-line appearance in the system and that the primary telephone does not have a multi-call line as its preferred line. Note that the primary telephone cannot be programmed as a SUPSERSET 401 telephone or a Mitel 5201 or SUPERSET 4001 telephone.
In CDE Form 03, enable Option 274, ONS Ring Group Member (ensure that COS Option 607, Telephone - Associated Modem Line, or COS Option 272 Guest Suite Extension is not enabled). Recommendations are that all sets in the group have the same COS, COR, and Tenant Group.
For ONS Ring Group Members (excluding the Master)
In CDE Form 09, program the ONS telephones for the ring group. Program the Primary DN of the Master in their ASSOC field.
In CDE Form 03, enable Option 274, ONS Ring Group Member (ensure that COS Option 607, Telephone - Associated Modem Line, or COS Option 272 Guest Suite Extension is not enabled). Recommendations are that all sets in the suite have the same COS, COR, and Tenant Group.