Pager Dialer Outdial from Nupoint Voicemail

[kwbMitel]

I used to be able to do this in my sleep. I can't figure out what I've missed.

I have a separate Line group for the Pager Dialer Application
I have 2 Pager Systems enabled

0 - Internal - [T]
1 - External - [T9T]
​

In the message waiting for a mailbox I configured MWI1 for

Type = Pager

Primary MWI = Message Delivery
Telephone number = XXXX (Speedcall on system)
Post Pager = G
Access type = 0-Internal
Freq = 3 Interval 1
Busy attenpts = 3 Interval 1
Active Time = 8:00am to 5:00pm
Alternate Pager not enabled​

As far as I can tell, nothing happens.

I know the outdial port works as it works from MiCollab to deliver VM messages




**********************************************
Any intelligent fool can make things bigger and more complex… It takes a touch of genius – and a lot of courage to move in the opposite direction.

 

[lowradiation]

Check your offline configuration:
Select your outbound pager dialer line group
Select the Dialers (Pagers) tab
Make sure your 0 - Internal and 1 - External are checked
Even though they are created, they still have to be checked off in the line group

 

[kwbMitel]

As it turns out, another tech had setup the outdial setup in the advanced MB setup and it must have been conflicting.

Once I turned it off, the MWI worked exactly as I thought it should

**********************************************
Any intelligent fool can make things bigger and more complex… It takes a touch of genius – and a lot of courage to move in the opposite direction.