Search results for query: *

Did you add another ext. to the voice mail?

flori1 Flash 2 24 "mailbox" - 1 General deleivery mail box :- 1 Admin mailbox =22 user mailboxes Flash 4 =22 user mailbox+24 mailbox= 46 user mailboxes????? How many total have you built...

There is a way to do what you want;I did it using a Valcom 5 watt horn and a M7100 Phone's bell port.Aux ring contacts and page relay contacts.I can' find my wiring drawings and can't remember the wiring connections.The tip and ring to the horn were split between the make/brake contacts on the...

http://www.ampnetconnect.com/images/pix.gif Maybe this?

You are right Curlycord. I didn' think that one out.So apparently his Line 1 is Intercom 222 (default)? One phone with one intercom and the rest with 2? Ken

I wonder what system this is? Port 122 would be a target line in R1T1 in a MICS .Port 101 and 102 would be lines 1 &2 in a Cics and Mics.I retired in 2004 and never worked on a BCM? Don't know port #'it. I would like to know what the port # are on some of the other phones? Ken

If you have changed the trunk card and moved to another port then that leaves your jumper or trunk cable.Make sure your trunk cable is seated good and not cocked out from the bottom. Check your color code ,some cables it is easy to mix the o/w and br/w colors. Cook said there was nothing in...

If the CO is set up for pulse dial and you system is tone dial,you will have this problem.

I wonder if you don" have house cable trouble.Have you tried moving 229 and 235 to the phone closet and put jacks on the jumpers after taking them off the house cable pair.I have had existing cable pairs daisy chain and 2-3 jacks on the same cable pair.Weird problems!

Sorry .Goes in the one with phone emblem

Which plug do you have your phone cable(25 Pair) pluged in? Goes in the one with telephone pole.

Was the KSU set up two diget DN when it was up and running? If it was try setting it back to two dig and connect the VM to sta 36, port 116.

The only other thing I have done ,go into maintnence ,busy out the port in maintnance, back out of maintnance, wait a few minuets ,go back into manintnance, un-busy port.I guess you have already power cycled the Startalk? If you have it may take it several minuets to come up. If you are getting...

Try calling the Dn the startalk is on, some times this has worked for me.I don't know why,maybe "wake"it up?

Have you tried going into Maimtnance checking the Dn/Port to see if the system see the Strtlk?

Did you try F903?

One time I got my amp cables mixed up and terminated the 2nd Amp cable where my trunks were to go.When I terminated my lines thay didn't work. I was terminatin my dialtone for Line 1 on Exr 245, not on port 201. Ken

Sounds like something is shorting the line out.First card on right should be a LS/DS or CI card. Line 1 should be on blue/white pair on AMP cable that has telephone pole on it. Line 1 should be 001, port 201. Look under Maintnance under port 201 ,is it Idle or Bsy? Ken Also assigh Line 001...

In the Norstar you can change the No. plan at Start-UP under Start DN, default is 221-445 In a fully expanded ( 8x 224) all digital sta system. If your room no's. were 101-xxx change your DN Start N. at 100 (221 is default console). Keep in mind you have two DN's assoated with each set and...

Disconnect KSU from AC power,power back up,you can only do Start-up within 15 minutes of power up