what is the power required for Norstar Plus ICS 2

[serge9]

what is needed to make the following system work safly
recently removed from an office
now i need to install it in my rented appartment
so i can practice and test
i do not know if i have 220 or 110
what i need to do to connect that system properly, so i can have a system to test and practic

Norstar Plus ICS 8x32 fiber NT7B53FA93 (MICS 4.1 software)
NAM NT5B74AAAZ
the amphinol are numbered (from top to bottom)1, A, 2
am i right if i say that 1 is for lines , 2 is for stations (sets) and A?
on the 1 amphinol, lines will be on the 110 bix from pair 0 to 8 and sets will be on the same reglet ?

fiber slot 4 go to NAM

thank you gens
Serge9

 

[oldpolelineman]

One time I got my amp cables mixed up and terminated the 2nd Amp cable where my trunks were to go.When I terminated my lines thay didn't work. I was terminatin my dialtone for Line 1 on Exr 245, not on port 201.

Ken

 

[serge9]

problem has been resolved

Thank you all for contributing to resolve the problem
that i created by (as ken pointed out) wrong wiring.

should i say Ken
or Old-Man!

that is exactly what happened
what a story!
in this case, i was terminating my dial tone for line 1 on port 101!

Now i can get some sleep!
Wish you all Merry Christmas and Happy New Year
Serge