what is needed to make the following system work safly
recently removed from an office
now i need to install it in my rented appartment
so i can practice and test
i do not know if i have 220 or 110
what i need to do to connect that system properly, so i can have a system to test and practic
Norstar Plus ICS 8x32 fiber NT7B53FA93 (MICS 4.1 software)
NAM NT5B74AAAZ
the amphinol are numbered (from top to bottom)1, A, 2
am i right if i say that 1 is for lines , 2 is for stations (sets) and A?
on the 1 amphinol, lines will be on the 110 bix from pair 0 to 8 and sets will be on the same reglet ?
fiber slot 4 go to NAM
thank you gens
Serge9
recently removed from an office
now i need to install it in my rented appartment
so i can practice and test
i do not know if i have 220 or 110
what i need to do to connect that system properly, so i can have a system to test and practic
Norstar Plus ICS 8x32 fiber NT7B53FA93 (MICS 4.1 software)
NAM NT5B74AAAZ
the amphinol are numbered (from top to bottom)1, A, 2
am i right if i say that 1 is for lines , 2 is for stations (sets) and A?
on the 1 amphinol, lines will be on the 110 bix from pair 0 to 8 and sets will be on the same reglet ?
fiber slot 4 go to NAM
thank you gens
Serge9