Search results for query: *

Anyone have a working integration between NEC SV9500 and Cisco Unity VM using SIP stations instead of the 24DLI/TIMG arrangement? Any input would be appreciated.

Program 11 - Numbering Plan

You may want to ask your sales team if this is going to effect your PAD cards. The SV9500 abandons that philosophy, I think it carries over to cable migrations but verify with your sales engineers. Thanks,

After creating your tables in 8A4XXX, verify your AMND or CMD 855 satisfies your dialing parameters. Looks pretty straight forward and well organized. Thanks,

Make a virtual appear on all phones in question....transfer calls to that virtual using call pick group (one button) option to answer which will move the call from the virtual to the users prime line. May work for your scenario. Park and Page are normally used in that order to have parked calls...

Command 76xx

31>0 equals 03 for North America

Either SW10 or PC36 failure.

You can try dialing 555, the default directory and see what happens. If nothing happens, you WILL need PC, cable and Co-Sessions. Directory is not a function of Touch Tone System Admin tools. jlpannell@msn.com

Answer light can be turned off by hitting Feature + Answer MW needs Message Search code then 3 to clear

Transfer to write

The protocols mentioned refer to ISDN or CCIS/Qsig functions. The 24DTR is only a T-1 card and has no D or C channel communications capabilities. Your only options is D4 AMI or ESF B8ZS. If you want QSig or 5ESS emulation you need a 24PRT card. Hope this helps. Can you tell me how to hook up...

If you have a DSS console on the system, set up a mode change button and a DND button this will allow you to toggle between normal function, MW function and DND function. When DSS is in DND mode any station in DND will be lit, depress the key, lamp goes out and DND is canceled.

Under Tools you should see a Command Listup+ Also clipboard is part of MatworX with Options, it is normally not included in the regular versions of Matworx. Check your CD and see if it says "With Options" or "With Tools", I can't remember the exact verbage.

A disconnect from the CO? Are you getting any loop current drops or a battery reversal on disconnects? Jerry Pannell www.SCLB.com techs@sclb.com

Hey Neax, Excellent tip for soft keys. We usually throw in a headset key too on the soft keys to save a button later on but you then have to have a release key for your other active states. We also use the CID key but I do like the Record key, Thanks. Jerry Pannell www.SCLB.com techs@sclb.com

Need 700 or 750 series or higher if I'm not mistaken to fwd off premise. I can verify the rev. level and let you know but I know older release can not go off prem Jerry Pannell www.SCLB.com techs@sclb.com

hey dj, Your digital station cards will say ESI(8), the CO lines are COI(8) and the voice mail card VMS has the hard drive and db9 serial port connection. The t-1 card would like to have 3 slots (8 ports per slot) but you can use 2 if you have 16 channels or less. The programming is kinda...

B8ZS and number of B channels active. Tie the B's to the D and you should be set Jerry Pannell www.SCLB.com techs@sclb.com

Yeah, there is a CCIS/ISDN manual that pretty much lays out the framework, not hard to understand or read. The NEC 2400 documentation guys have always done a good job with flowcharts, procedures, etc. Jerry Pannell www.SCLB.com techs@sclb.com