PRI setup 1

[stevetotaro]

I am upgrading an IPK from 16 pots lines to a PRI. I have not done this yet and would like any information tips or tricks that you may be able to supply on configuring the card and system or anything else that may be relevant.

Thanks in advance.

 

[OMBD]

Pretty straight forward.
Do you have a programming manual?
Look in LK3 area and find 90% of what you need.

Jerry Pannell

http://www.SCLB.com

techs@sclb.com

 

[stevetotaro]

I do have the manual. Any tips on the other 10%?

 

[OMBD]

B8ZS and number of B channels active. Tie the B's to the D and you should be set

Jerry Pannell

http://www.SCLB.com

techs@sclb.com

 

[stevetotaro]

thanks, it went pretty smoothly considering it was a first.

 

[dajohnso]

Did your T1 (Pri) card take up 1 or 3 slots? I just posted a message about being told I need 3 slots free (I only have 2)