Search results for query: *

In the extra settings box of advanced modem properties, put M1L0 Cheers, Jim http://members.cnx.net/reboot/

Com1=3,5,6 on {Default IRQ 4 selected} Com2=4,6 on {Default IRQ 3 selected} Com3=3,5 on {Default IRQ 4 selected} Com4=4 on {Default IRQ 3 selected} The most common is Com 4, IRQ 3, because it rarely conflicts with any other device. Make sure you DISable com 2 in BIOS setup first...

I'm sure you'll find something here: http://beta.driverguide.com/beta/index.php?action=dosearch&qm0=supra+2311&sm=s The 2311 is the model # for the 56e pro (external). Are you sure that's the model you have? According to the chipset, it's a twin chip Rockwell HCF modem, in which case, the HCF...

http://www.tek-tips.com/search.cfm Search for it. It's been covered plenty of times. Cheers, Jim http://members.cnx.net/reboot/

This has been done, tried, messed up, and otherwise fixed. Another excellent resource: http://forum.pcmech.com/showthread.php?s=&threadid=24831 Cheers, Jim http://members.cnx.net/reboot/

Boot to your XP CD. Select new install, not upgrade. Hit "R" to enter the repair console. At the prompt, type: fixboot Again at the prompt, type: fixmbr Take out the CD and restart. If that doesn't fix it, boot to the XP CD again. Start a new install Hit F8 to agree to the TOS/License...

Heh, especially my (lack of) memory! :-) Cheers, Jim http://members.cnx.net/reboot/

Heh, it's possible that I've completely blocked that bit of DOS, because I have been using XXcopy for so long, and tend to just clone things, not worrying about individual file/folder names. I probably should have shut my mouth about 4 posts ago ;-) Cheers, Jim http://members.cnx.net/reboot/

Hmmm..."E" is source, "F" is destination. Pretty sure I got that right. I can't find my resource, but somewhere something prompted me to put the wildcards in the destination, when using Xcopy... I was thinking the wildcard was needed in destination to maintain folder...

Using "copy", you would specify *.* for both source and destination. Using "xcopy" only destination is needed AFAIK, although it's probable that xcopy doesn't need wildcards at all (I've forgotten). /s copies dirs and subdirs, except empty ones. /y suppresses the overwrite...

Or use this syntax: xcopy e: f:*.* /y /s Cheers, Jim http://members.cnx.net/reboot/

Asus P4C800, with matching DDR3200 RAM. Cheers, Jim http://members.cnx.net/reboot/

Many times I have had to replace mobos, video cards, and ram when a PSU blows. For the price of a 440BX board, you could probably get a decent KT400 board, and Athlon, unless you're willing to go used, and/or try ebay. Cheers, Jim http://members.cnx.net/reboot/

"Asus A7V266-E, which is incompatible with the XP operating system." Huh? I'd sure like to see something to back up that statement, before I denounce it to be totally false ;-) Cheers, Jim http://members.cnx.net/reboot/

"VENDOR ID : 8086" This is an Intel modem, not a Rockwell. Cheers, Jim http://members.cnx.net/reboot/

simpler way: path=c:\windows\command deltree /y c:\windows\cookies\*.* etc. Cheers, Jim http://members.cnx.net/reboot/

@echo off cdcd c:\windows\tempor~1 attrib -h -r -s -a *.* del. |y Cheers, Jim http://members.cnx.net/reboot/

If you don't want to buy Ghost, I have complete instructions on doing it, simply by using the tools built in to Win98. http://www.pcmech.com/show/optimize/118/ Cheers, Jim http://members.cnx.net/reboot/

If using an 80 wire cable, set both the hard drive and CD_ROM as "CS" or Cable Select, and there will then be no performance problems. Cheers, Jim http://members.cnx.net/reboot/

I can't find the article either, and hate trying to search at MS. You'll just have to make sure the modem is turned on before the computer. Here's a couple of init strings you can try, although nothing may improve your connection. If there's more than one analog to digital conversion between you...