Search results for query: *

If you aren't currently using the wireless portion of the router, you can turn that off...at least that's the way it is on most Linksys routers....disable wireless Or, like was mentioned, change your SSID, disable the broadcast of it, and enable WEP..

Just throwing out an idea here..but I believe Cisco frame-relay encapsulation defaults to a cisco propriety type of encapsulation...to do universal multi-vendor, you'd need the 'frame-relay encapsulation ietf' command on the physical interface. Its possible that your service provider and your...

Yeah, PVDM is the key.... I think that's required to do voice in that router, although with the appropriate VIC card

If it was arp entries, they should eventually age out, or you could manually clear them on the adjoining routers/switches. So, I'm thinking its something else, although I'm not familiar with the Big-IP switch.

I think all 2500 isdn ports are S/T, except for the modular SM cards that go in 2524's and 2525's.

32M of flash in a 3640 is typically 2 16MB simms..

also want to control-break during bootup and 'unset' any nondefault set variables....plus set the config-register to 0x2102.

I can't remember the exact syntax, but you need to do a 'del flash' and then select partition 2, or 'del flash:2'. That will erase the second partition. Then, you need to combine the two partitions into 1 with conf t partition flash 1 If you do a 'show flash' then you should have 1 partition...

If you need speed, go with the switch (Layer 3).... if price is most important, go with the router...

You'll need at least a 2621 if you want 100Mbps ethernet... 2611 only has two 10Mbps ethernet ports. Or a 3620 with an NM-2FE2W....all end-of-life stuff so you should be able to get a good deal on it.

Hey CG, 1. No, I think you need the newer comp exam 640-801?? Or it can be taken as two seperate exams? 2. I think you can pass the CCNA with simulation labs, equipment would be helpful, but not necessary...if you want to continue on to CCNP then it would be a good idea to get your hands on...

10BaseT is default on a 2514... no 100BaseT capability.

Drae.. I'm also studying for CCIE written Routing and Switching (scheduled in December), just finished CCNP last month. I'm using the CCIE Exam Certification Guide and will most likely use Boson Exams for preparation. I work directly testing and configuring Cisco routers and switches, so...

you must be in privileged exec mode to issue those commands... type 'enable'... might ask for a password if one's set, hopefully you know it.

show startup-config for what's saved in nvram, and/or show running-config for what the router is currently using (in case you've made changes and they are different, probably not)...

Depending upon what terminal program you are using... from Hyperterminal, you can to a <transfer><capture text> and then specify a log file... or just cut and paste to a text file from the terminal window.

Perfect...thanks.

I'm building a spreadsheet and want to base text colors (red vs green for instance) upon comparison to another cell value. Say for instance value is greater than 50000, then green, less than 50000, then red... I want to be able to change values and have the colors automatically update, any...

I agree with Mike... Plus, it really depends upon what capabilities of the mc3800 are really being employed in its current application. Is it just a t1 link to the internet and ethernet back to the LAN, or are voice capabilities actually being used.

Thanks for your concern... I'll be sure to check the cable/core size/type and length before attempting to match my added cable...