Search results for query: *

AlarmTraq is still your best value.

same problem for me. pre-recorded (talent) message as auto-attendant greeting goes directly to the timeout destination in the middle of the recording sometimes after a reboot.

Look at: http://www.alarmtraq.com/Docs/s8700_oss_setup.htm After setting up the S8700 accordingly, issue the "testinads" command from the bash prompt and then disconnect the PPP connection as soon as possible.

take a look at www.alarmtraq.com

Has anyone used the Omnitronix SL81 to dial a NOC for remote alarm monitoring?

What is BCMR?

I found a really good document on the alarmtraq site that is pretty good. http://www.alarmtraq.com/Docs/s8700_oss_setup.htm I used it to setup my system and it worked out great for me.

That worked, Thanks merlinman.

Hey tdaugirdas I gave you a star. Thank you very much. I am using a Merlin Legend R7.0 with a Merlin Messaging R1. Message lights did not work until I set the ports as RotaryEnable. I don't suppose you have an expalnation why this worked. Thanks again.

same problems here. I found that if I do the DCOM changes the login window goes away, but the message lamps are still hit and miss at best.

you can access the reports as long as you have the alarmtraq database setup as a system DSN (ODBC Link).

I have the same problem, any ideas?

merlinman: Yes, overseas calls ring correctly and complete with no problem. SBC says it may have to do with the "name" format I am sending with the setup message.

How do you remove the click at the beginning and end of a page on a station port?

Sorry for the wrong forum on the previous message.

Merlin Legend R7 PRI not providing Busy Tone for International calls only. Calls made to a busy number in the US get a busy signal, calls made to a busy number OUTSIDE the US get dead air. This is an SBC(SNET) circuit configured as custom. Any ideas...

Merlin Legend R7 PRI not providing Busy Tone for International calls only. Calls made to a busy number in the US get a busy signal, calls made to a busy number OUTSIDE the US get dead air. This is an SBC(SNET) circuit configured as custom. Any ideas...

check out: http://www.reillytele.com/AlarmTraq/alarmtrax_propertiesSNMP.htm#IP%20Office

umangs, We use AlarmTraq to monitor all our Avaya systems via SNMP traps or traditional INADS. It will report all traps received and filter the alarms before notifying the techs via pagers, email, blackberry or web. It will also act as a Proxy Agent to forward the traps that are seen as...

Take a look at AlarmTraq http://www.alarmtraq.com I have been using it for the last few months and it works great. Works with all Avaya products via standard modem, PPP or SNMP. The newest release even works with our IP Office systems. Anyone else out there using AlarmTraq?