Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
INADS setup for S8700 1
- Thread starter Rick46256
- Start date
-
1
- #2
You can find the specific commands needed to forward alarms on the s8700 via INADS on here
You will need to go into the Linux shell and follow the procedure for the almenable commands etc.
Also you can change the SNMP traps et al in the maintenance gui on the front end by going into the "snmp agents" and "snmp traps" section which are amongst the first config options at the top left of the page.
You will need to go into the Linux shell and follow the procedure for the almenable commands etc.
Also you can change the SNMP traps et al in the maintenance gui on the front end by going into the "snmp agents" and "snmp traps" section which are amongst the first config options at the top left of the page.
IGiveGreatDialTone
Technical User
I found a really good document on the alarmtraq site that is pretty good.
I used it to setup my system and it worked out great for me.
I used it to setup my system and it worked out great for me.
- Status
Similar threads
