SNMP and the s8700

[VLG711]

Does anyone out there have any experence using SNMP Management software to monitor Alarms, Events, trunks etc.... on a G3 with communication Manager. What software are you using? Any experince with setup and use would be great.

Thanks,
vlg711

 

[1a22ip]

I have this setup and working fine. The 8300 reports to Netview 6000 and Whats up Pro. One issue I've found is that the SNMP stuff will only report on the server side of things. For PBX stuff I continue use the automation included in the ASA product. Any other info you might need let me know.

Thanks
ED

1a2 to ip I seen it all

 

[IGiveGreatDialTone]

Take a look at AlarmTraq

http://www.alarmtraq.com

I have been using it for the last few months and it works great.

Works with all Avaya products via standard modem, PPP or SNMP. The newest release even works with our IP Office systems.

Anyone else out there using AlarmTraq?

 

[irisngen]

i use Teltronics IRISnGEN. works great

 

[umangs]

Hi IGiveGreatDialTone,

Would you provide more insight into the Avaya Product monitor via SNMP like Which products does it monitor and what is the alarm level which is reported.

I would like to know from you if the Monitoring tool can monitor the Avaya products through SNMP and not report alarms to the NMS system through SNMP.

Thanks in Advance for the information.

Others in the Forum.

Would appericiate if any one could provide any information on Monitoring Avaya Products via IP and SNMP.

 

[m4ilm4n]

I use a version of open-source Nagios called Sentinix as a monitoring system. Takes work to get it up and running, but once it's there it's awesome. Coupled with a Win32 tray utility called NTray, we get SNMP alerts by popup windows, e-mail, or text-to-cell phone.

I haven't parsed the MIB for the 8300 yet, but if it doesn't have anything to monitor trunks (as mentioned above), then maybe Avaya should make an effort to add it; since the PRI terminates directly to the card, it's not like there's a CSU/DSU or inline probe to get traps from. Do AlarmTraq and IRISnGEN monitor trunks?

 

[Spookytooth]

There is a MIB for the G700 downloadable from support.avaya that send a trap if the G700 loses its synce source (T-1)
Its helpful when you have LOS on a MM710. It should send a trap whenever the LED panel has a red

 

[VLG711]

Hi All,
Thanks for you input. I was looking at the Avaya MIB and noticed that there are several entries for some of the basic commands that we use to monitor our system. I was hoping that I could take advantage of SNMP to alarm on conditions in the PBX. Here are some examples of how I think some of the system commands align with entries in the MIB. Can anyone give me some input on how this might be accomplished?

Thanks in advance,
vlg711



list measurements outage-trunk today (yesterday)
g3trunkout OBJECT IDENTIFIER ::= { g3-mib 76 }

monitor traffic trunk-groups

list measurements trunk-group summary yesterday-peak
g3trunksum OBJECT IDENTIFIER ::= { g3-mib 53 }

display alarms
g3alarms OBJECT IDENTIFIER ::= { g3-mib 4 }

list meas load bal Incoming/Intercom/outgoing/tandem/total
g3loadtotal OBJECT IDENTIFIER ::= { g3-mib 78 }
g3loadint OBJECT IDENTIFIER ::= { g3-mib 79 }
g3loadinc OBJECT IDENTIFIER ::= { g3-mib 80 }
g3loadout OBJECT IDENTIFIER ::= { g3-mib 81 }
g3loadtan OBJECT IDENTIFIER ::= { g3-mib 82 }


disp events/
g3eventhour OBJECT IDENTIFIER ::= { g3-mib 128 }
g3eventday OBJECT IDENTIFIER ::= { g3-mib 129 }

disp errors
g3errors OBJECT IDENTIFIER ::= { g3-mib 5 }

 

[VLG711]

Anyone have info on the above?

Thanks Again!

 

[IGiveGreatDialTone]

umangs,

We use AlarmTraq to monitor all our Avaya systems via SNMP traps or traditional INADS. It will report all traps received and filter the alarms before notifying the techs via pagers, email, blackberry or web.

It will also act as a Proxy Agent to forward the traps that are seen as priority and send those to our NMS.

To setup SNMP on alarmtraq click

http://www.reillytele.com/AlarmTraq/alarmtrax_propertiesSNMP.htm

We use it for our:

S8700 (SNMP or INADS)
S8500 (SNMP or INADS)
S8300 (SNMP or INADS)
Definty G3r, Si, csi (INADS)
IP Office (SNMP)
Modular Messaging (INADS)
Intuity Audix (INADS)
Definity Audix (INADS)
CMS (INADS)