SNMP trap with Avaya VOIP Monitor Manager

[bdelmar]

Does anyone know what MIB files are needed for use with AVAYA VOIP Monitoring Manager?

Ive seen the documentation on use with HP Open View and CastleRock, but nothing for VOIP Monitoring Manager.

 

[IGiveGreatDialTone]

check out:

http://www.reillytele.com/AlarmTraq/alarmtrax_propertiesSNMP.htm#IP Office

 

[bdelmar]

I got AlarmTraq and have it all setup. I have an IP406 configured and sending traps to it and its working great. Im trying to get an IP403 to send traps to it but not having any luck. The SNMP settings are configured the same as the IP406 is. When I look in Monitor, this is what Im getting...


0mS PRN: Monitor Started IP=10.13.42.201 IP 403 DS 2.0(16) Mirant DC
1mS PRN: LAW=U PRI=1, BRI=0, ALOG=0, ADSL=0 VCOMP=0, MDM=0, WAN=0, MODU=1 LANM=0 CkSRC=5 VMAIL=1(VER=2 TYP=1) CALLS=0(TOT=4)
3005mS PRN: +++ START OF ALARM LOG DUMP +++
3005mS PRN: ALARM: 31/08/2005 16:41:18 IP 403 DS 2.0(16) <TLB Data Error> CRIT RAISED addr=01010008 d=5 pc=ff5dfe2c ff5dfd20 ff67f2d0 ff676428 ff675cfc ff675e04
3006mS PRN: ALARM: 31/08/2005 16:41:40 IP 403 DS 2.0(16) <TLB Data Error> CRIT RAISED addr=01010008 d=5 pc=ff5dfc34 ff5dfc00 ff67f8c0 ff6762b0 ff675c58 ff675e04
3006mS PRN: ALARM: 31/08/2005 16:42:02 IP 403 DS 2.0(16) <TLB Data Error> CRIT RAISED addr=01010008 d=5 pc=ff5dfc34 ff5dfc00 ff67f8c0 ff6762b0 ff675c58 ff675e04
3006mS PRN: ALARM: 31/08/2005 16:42:36 IP 403 DS 2.0(16) <TLB Data Error> CRIT RAISED addr=01010008 d=5 pc=ff5dfc34 ff5dfc00 ff67f8c0 ff6762b0 ff675c58 ff675e04
3007mS PRN: ALARM: 31/08/2005 16:42:58 IP 403 DS 2.0(16) <TLB Data Error> CRIT RAISED addr=01010008 d=5 pc=ff5dfc34 ff5dfc00 ff67f8c0 ff6762b0 ff675c58 ff675e04
3007mS PRN: ALARM: 31/08/2005 16:43:32 IP 403 DS 2.0(16) <TLB Data Error> CRIT RAISED addr=01010008 d=5 pc=ff5dfc34 ff5dfc00 ff67f8c0 ff6762b0 ff675c58 ff675e04
3007mS PRN: +++ END OF ALARM LOG DUMP +++