Search results for query: *

I would do an upgrade and load a default database Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

An ICS is a Norstar, not a CS1000 Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

What do you get for STAT CNFG in ld 48? Does it show a CSL number? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

What is the LHK set to? Does the line have roll over keys? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

You shouold be able to CDP a number to go out a QSIG trunk to route to Cisco. Can you turn on d channel messaging and see what is going on with the call? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

Can the port you copied dial out? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

sch5575 means the MSDL has no address, and yes 11 means 1 and 1 Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

Tball1 yes you can, when you build the D Channel it will ask what Dnum, port and group on the msdl Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

I am pretty sure I have an install diskette at home lol but would have to search for it Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

RDNA Restricted DN Access acdc-1 (NO) Enter NO if use of DN keys is to be allowed without logging in. YES Enter YES to restrict agents from making outgoing calls when not logged in. Prompted if an Auxiliary Data System (ADS) or Schedule Block (SCB) exists. Thanks, Buddy Linked in Profile...

I agree with KCFLHRC, we watch the rectifier or UPS and watch it drop about 10% and calculate the time it would take to drain the batteries Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

TheMitelGuy, we are migrating to a hosted system because we are under pressure to get equipment out of out data centers but we are going to a hosted Cisco system that keeps the same extensions and sets, not sure why Bob is migrating Thanks, Buddy Linked in Profile...

Yes in the CEQU when you get to DLOP you have to put a number in, I have never had it make a difference if i out 23 or 24 Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

I believe its set when you add the loop as a PRI in CEQU Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

you will have to out the trunks in Ld 14 then out the Rote in ld 16 then you can out or change the D Channel and rebuild Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

Do you need to be passing the 9? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

Do you have a clock controller on that card? If not it will be red. You can add the other PRI as secondary in ld 73 Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

is the Loop a TMDI loop in CEQU? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

XPAR will connect you to the transparency mode port to talk to the PBX Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell

What is your type in the route data block? does it match the TN? Thanks, Buddy Linked in Profile http://www.linkedin.com/in/buddyhassell