Search results for query: *

to my above post I was thinking of an RJ-45 Jack pins 1-8... I should say centre pins on all RJ's Regards, Dr VuDu

Analogues: on an 8LCA about 9/10th of a mile on an AUCA and 4LLC 7.5 miles Digital 8DLC 1000 Feet 2DLC 2800 Feet Digital with AC Adapter 4DLC 4000 Feet 2DLC 4000 Feet if you have distances that are close but not working, double up your pairs to the 4 and 5 pin (I.E. wh/O and wh/Bu on pin 4...

I would check programming. MOC mode 200>A1>????? 200>B1>????? it should/could be 200>A1>012 (CF Busy/NA set) 200>B1>013 (CF Busy/NA cancel) I would also check CMD 21 for single digit access code to make sure that wasn't interfering with the 200 code. 210>A> if it says empty your good if...

AMND and 3536 should speed up your side of the equation. it won't affect the carrier are the carriers the same for both locations? some top tier carriers will process calls faster do you use access codes that have to entered for your 2000 site? a little experiment kind of like your theory to...

OMG.... Thats almost as good as you call this special number enter his 37 digit code and you can make free long distance calls for life. your getting RBT from the carrier and 4-6 seconds later the phone is actually ringing. The only place you could reduce time is before the RBT. assuming you...

Not uber familiar with the Octel. more of an AVST kind of guy. but I would set up a notification to a pager or cell phone if I was having problems with a MWI but on the switch side try this AKYD KYI= 2 KD= 2 (DSS Key instead of a Multi line app) TN= X STN = 2240 RG = 7 Regards, Dr VuDu

whats the VMM platform? Regards, Dr VuDu

How about follow phone feature F-31? works great for digital to digital moves. Regards, Dr VuDu

First I would delete the offending mailbox then give a call to voicemail and leave a message. Check for the offending recording. retrieve the voicemail and check for the offending recording again. if the problem goes away I would reinstate the mailbox and see if another default greeting was...

Sounds like someone recorded a Greeting in the name field I would get into the Voicemail system and reset the voicemail box. otherwise I would have the user log into the box and chack personal settings and rerecord the voicemail box NAME this should do it. Regards, Dr VuDu

your looking for a feature called "Caller ID Class" http://www.neccare.com/cng/docs.nsf/Lib3?OpenView click on NEAX2000/NEAX1000 then IPS then the IPS Features and Specs Manual look for caller id class and it should point you on thre right direction. you may also want to pick up the...

Data Line Security! ASFC SFI 11 set to 0 that will Gar'un'Tee that no one will listen in on his calls Regards, Dr VuDu

do you have a disconnect code (hex) from the Veraz? on the disco? here's a link to a table for disconnect codes for ISDN. http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a008012e95f.shtml Regards, Dr VuDu

and if it's not a true console but a dterm acting as a console . try 5110>tenant number>extn or pilot number to forward to. Regards, Dr VuDu

Ahhhhh Ha! we have a winner! your DID's are mapped to a virtual line! so in essence what you need to do is map out the 5xxx series of numbers via 7600 and you should be able to find open DID's if there are any more. you may have to create 5xxx series numbers in command 11 and map them to the...

Ozzie is right you shouldnt be having to fix it. but to stop some finger pointing that always happens here, and to CYA... I take it that the NEAX is the Network side and the Veraz is the user side of this ISDN span. I am wondering what the ALERT message is... Regards, Dr VuDu

easiest way is to call your DID and see what key it rings on. then call from an internal xtn and check the key. if they are different you may have the subline outlined above. if they are the same you may have a virtual forwarded to your extension. to check you need to press in this order...

do you have a subline or virtual on the phones that would indicate an outside call from an internal one. I.E. Station 2262 9000>2262,01>2262 9000>2262,02>5262 so your prime line is an internal Xtension and the outside line a subline. have you cheked cmd 11 for the virt extn and E600 for a...

hmmm. I haven't worked with a veraz, but I would start by putting the T-bird or other monitoring device between the 2, to find out what the call message is that is causing that failure. call scenarios to try. call to the NEAX from the Veraz (Station to Station). does the problem occur? call...

ok the incomming lines are not being translated to an extension via 3518 and 7600. so your indial should match your numbering plan. so 4 digit number plan your main line should be extension 6111 in 3 digit number plan your main line should be extension 111 I would run through command 10 or 14...