2400IPXUtech
Technical User
LD carrier has cut from a FUJI to a VERAZ IP switch. 2400 works fine on the FUJI but fails 4 out of 10 calls on the VERAZ. Programming is a standard PRI w/ NI2 configuration. Layer 3 msg’s. reveal's a STATUS msg. "MESSAGE NOT COMPATABLE WITH CALL STATE" . This site has over 20 PRI's all NI2 and fails no matter were or what card it is placed on. I have also tried setting up for CALL by CALL service. I am looking for anyone who has connected to a VERAZ switch, w/ a 2400, 2000, or any NEC product to compare programming data. I am also extremely open for suggestions.
thx
thx