Search results for query: *

it was more the amount per set 63 and the concurrent use 5 plus principle that i was looking at :) ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

You do have limits on bridged apperances https://downloads.avaya.com/css/P8/documents/101039165 is for r7.1 have a look at this doc and you will see what the specific scenarios and limitations are. ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test...

If they are unistim devices , you would have to flash them with SIP firmware and they would then register to session manager , CM would be acting as a feature server supplying the sets with settings and features via a process called PPM. Depending on your environment and usage requirements this...

A panasonic KX-TD816 ...is extremely old kit ...it has the capacity for 8 lines (trunks) and 16 extensions (phones) It can just operate off x1 line from your carrier ...you would just need to programm it so the other 7 available line ports on the system that had nothing plugged in would not be...

Are they not in the help file on CMS supervisor client? ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

bridged appearance on another set maybe ? ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

[thumbsup] ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

There is not a native command in SAT.....but you can export the data from ASA and just select agent ID and tenant..if that's all you need ..to a .txt...or.csv ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

Good spot Tier3...I missed the "invite" comment...but agreed CM must be deleting the whole number and redefining..if it is CM ...the only thing he could be missing is the location from the commands...if it is CM....but this could be an adaptation in SMGR or the SBC........@OP can you detail your...

Yes the coverage on the station needs to be changed manually , the time of day will allow you to apply different coverage paths based on the criteria set in its tables , but on the station you add "t1" or whatever the corresponding time table number is ,in the coverage field. You have lost me...

Also it could be "disp tandem-calling" as its a call in to the the pbx and out based on your trace. ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

so its using partition routing ..it could be the route pattern thinking about it ...it may be deleting all the digits and re-adding the number with the suffix ..need to check your route pattern based on the time off day and PGN settings. ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore...

So run the command that AvayaTier3 gave you and that will show you here to look , if it is CM adding the digits. ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

Direct media ? ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

l ars/aar digit conversion" see if its appending the suffix in there......ignore the route pattern for obvious reasons..my bad. With that above command you can also specify locations , in your trace it is using the location 1/all ...that location would just need appending to the command. The...

Could be your ars/aar digit conversion , could be route pattern.... could be UDP table....... ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

I have seen this before on 5.2.1 but for the life of me cant remember what it was.....try running a list trace station and call the VDN...if you havent already done that...as the station trace gives much more info..might help/ Also have you got a wait time 2 secs hearing ringback at the...

Provision will achieve this ...but its pricey ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

46XX series phones not a problem , cant help with the console....but if they are paying for CM8 can they not be guided for soft attendant? ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.

Depending on your software level you can choose to use the secondary external interface. The rest can be configured from server flows. ACSS (UC/SBCE/SM/SME) Not that they mean a thing anymore , get a brain dump pass the test crash the system.