Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jglittle

    Media Gateway Time

    Try pulling time from your network. My network guys have their Cisco gear pulling from a clocking source and I pull from them. My S8700 stays on track with the network thus computer time. Hope this helps, LittleJohn >>>------>
  2. jglittle

    Calls not going thru on PRI

    I don't understand where you're seeing "setup digits". It looks like from your trace that the call went through correctly. According to your trace it went over trunk 97 member 17 or the 17th channel. You may be running into a problem if this is a new trunk group from a different carrier. I...
  3. jglittle

    manipulating caller id in a definity

    Also on page 2 you can set the "Send Connected Number" to yes. ***Note: I've never used the US NI option...mine are all set to n and I always get ANI display on my phone sets. Hope this helps, LittleJohn >>>------>
  4. jglittle

    Collect digits - route to digits question

    Okay, here's my two cents worth. It sounds to me like you are letting people call into your switch to a specific VDN and then letting them dial a long distance number. I would strongly suggest against doing this. You could get into all kinds of problems, toll fraud, war-dialers etc. This...
  5. jglittle

    Personalized Ringing on Bridged Appearance

    Personalized ringing pattern is for the entire station. The only real control that you have over the individual line is ringer on or ringer off. Sorry. LittleJohn, >>>-------> Hope this helps, LittleJohn >>>------>
  6. jglittle

    Any have any experince with this?

    Internet Messaging is a whole new software package. I had been working on my company to buy it before we filed for chapter 11. I don't remember the exact quote, but it was expensive. Still, it would be a really cool toy. LittleJohn, >>>-------> Hope this helps, LittleJohn >>>------>
  7. jglittle

    Entry is bad

    I would try to use the Personal Station Access (PSA) Associate Code, ours is *4. Go to the phone, on the keypad do *4(Station Number)#(Security Code)# (E.G. *41234#1234#). Sometimes phones forget who they are and what they're supposed to be doing. That should give it a little kick in the butt...
  8. jglittle

    Question about Most Idle Agent ACD Split

    That answer is exactly right. I run a 200+ agent call center. All the information I have says that agent a will take the first call, then the timer is reset. Agent b will of course receive the second call. If your call flow is not working like this, then it is due to the kind of ACD that...
  9. jglittle

    restrict incoming calls at an extension

    You might try setting up a COR like this. LittleJohn >>>------> CLASS OF RESTRICTION COR Number: 9 COR Description: Internal/911/No External/FRL0 FRL: 0 APLT? y Can Be Service...
  10. jglittle

    CMS question about caller-info

    Hello Dmouge, There is one possibility that I can think of, that is to find a report that already has that field, go into CMS Terminal (or use ASA) drop down to Custom Reports, create a new report and use Get copy of design. You will then have to find your report, the one that has the field...
  11. jglittle

    Using List Trace comand

    DPhil, You are unable to "trace" an agent, only the station. However, if you are using systems such as eCAS(call accounting system)or CentreVu you can get most any information on an agent that you need. As to the COR question, when an agent logs into a phone that phone's COR no...
  12. jglittle

    CentreVu and Citrix

    Hello Folks, I hope that one of you Citrix gurus can help me out with an issue that I'm having. I would like to install CentreVu(an Avaya product for Call Centers) into our Cirtix environment. We did this at one time and the issue was that on bringing up a second session of CentreVu it...
  13. jglittle

    Aut-MSG-WT with Mode Code?

    Hello sjforcum, Dlorrd's answer is exactly right, here is the reason. Auto-message waiting works just like the message waiting light built into the phone. The Definity will look at the phone before sending a message to light the message waiting light. It will ONLY send it once, err go, if...
  14. jglittle

    Vu Stats Display

    Hello Bhodgins, As to your question about RONA. You can program a button on the phone to show RONA, but it is not agent specific. The button should be programmed as a "noans-alrt" and then the group(split/skill)number. When the light lights, the subscriber pushes the button and it...
  15. jglittle

    Definity G3 and Spectrum wallboards

    I know a little bit about them, but like Brandaris I need more information. The information displayed on the boards is based on CMS. It will display basically the same info as a vu-disp button on your phone. There is also a computer program that is used to configure the light boards, and you...
  16. jglittle

    Caller ID on outgoing calls

    Try this... Change trunk-group # (what ever your new isdn is) On page 2 of the trunk-group you should see 2 fields one is... Send Name: y the other... Send Calling Number: y Both should be set to yes in order to send ani. Hope this helps, LittleJohn >>>------>
  17. jglittle

    Vector Branching vs Multiple Call Forwarding

    Okay, here's what I believe I'm seeing. ARS digit conversion will work for an outside line (e.g. if you're dialing an 'outside' number). However, I have yet to be successful in making a 4 digit extension work through ARS Digit conversion. I can transfer to extensions, vdns etc as long as they...
  18. jglittle

    Vector Branching vs Multiple Call Forwarding

    Okay, here's what I believe I'm seeing. ARS digit conversion will work for an outside line (e.g. if you're dialing an 'outside' number). However, I have yet to be successful in making a 4 digit extension work through ARS Digit conversion. I can transfer to extensions, vdns etc as long as they...
  19. jglittle

    Vector Branching vs Multiple Call Forwarding

    Alright, I'm a big enough person to admit when I am absolutely confused. This is one of those times. Here's what I did... Change ars digit-conversion 0 matching pattern min max del insert net conv 1026 4 4 4 1009 ext y x1026 is an x-port station I...
  20. jglittle

    Vector Branching vs Multiple Call Forwarding

    Okay, I think I see the light now. So by using ARS Digit Conversion I can put my x6000 and have it actually dial the VDN. TOO COOL. You are the man. Thanks sooooo much. LittleJohn

Part and Inventory Search

Back
Top