Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Aut-MSG-WT with Mode Code?

Status
Not open for further replies.

sjforcum

Technical User
Jul 15, 2002
859
US
Is this feature button available using an Intuity Audix with Mode Code integration?

If it is, any ideas where I could be screwing this up? I've got a test lab on my desk. I left a message for ext. 2271. The message light on 2271's station lights up, but the aut-msg-wt button on station 3751 does not.

Any ideas?

TIA,
Steve
 
I had a probl;em similar to this in the past. I believe you have to clear all messages in the mailbox before you can see the "aut-msg-wt button on station 3751". hOPE THIS HELPS.
 
Hello sjforcum,
Dlorrd's answer is exactly right, here is the reason. Auto-message waiting works just like the message waiting light built into the phone. The Definity will look at the phone before sending a message to light the message waiting light. It will ONLY send it once, err go, if there is already a message for that extension it will not send it again. You can do a STATUS STATION xxxx and see if there is a message waiting. If there is, you've got to delete it first.
One other thing to look at, if you have just set up a station you should check the station page 2 and ensure that the LWC Reception is set to AUDIX. The default in the Definity is SPE.
Hope this information is of some use to you.

LittleJohn
>>>---->
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top