Search results for query: *

Is the phone or phones in DND?

Is selector code 4 set to transfer to an extension?

Seen this before, clock chip is toast.

Keep in mind you don't have to default your system but I think it would be easier, and copy will work but button programing does not copy. Also what phoneguyjr. was trying to tell you was at any LCD extension if you press [ FEATURE ] and dial 59 it will display your actual softwear version...

If I'm not mistaken your current voice mail ports are 51,52 and up ( 2 port vs 4,6 exp. card in vm ) when you swap out the 012 you will need to put that in slot 2 ( reading from left to right ) and your vm ports will now be 47,48 up. aAs far as hybrid mode you will lose all line prodraming such...

Set up a mailbox for the group, say 71, and then assign notification to a specified extension, say 10.

You need a large.

BP88 Are You in Nite Service at ext 10 ? What voice mail do you have? If it is a pc small/large At Ext 10 or 11 Enter system prog= Feature 00 Left Intercom twice, Then # 505 and then 7. Enter ext 78 change to 1 assigned, do the same for ext. 79.

Telecomboy, I've never been able to make that second button thing to work ( 11#PPP1234# ) is that a r8 feature?

Check your UPS, bypass it for a day or two.

Regardless of which VM you have make sure there are no messages in your other mail boxes and if it is, messaging or PCM ( small or large ) set call answer mode to "play greeting only" on the unused mail boxes.

Use a bogen WMT1A, set the HI/LOW Z strap based on which input you use on amp ( see instructions included in box for z setting ) If you program a button on your phone for all page I would suggest programing it via " Centralized Programing " on the 6.0 it would'nt work otherwise). Not sure if...