Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. yizhar

    Slowww Mailbox Backups suggestions anyone ?

    HI. I get similar results on several small business Exchange 2003 servers that I manage. I agree with "Justin2000" and Veritas that this is more an Exchange issue then BE. The performance could be related to the Exchange server hardware - not the tape device but general hardware: CPU, Disks...
  2. yizhar

    Veritas Backup Exec 9 Automation

    HI. My suggestion is that you configure the overwrite protection settings, instead of erasing the tape using a scheduled command, which could be a problem for example if the erase task succeeds but the backup operation does not start for some reason. You can configure the Media Set for...
  3. yizhar

    Shadow Copy Components error

    HI. I'm experiencing the same problem from time to time - about once or twice a week: Backup - Shadow?Copy?Components Shadow?Copy?ComponentsA failure occurred accessing the Writer metadata More info about the server: Penitum III 933mhz, 1GB Ram, Intel server board. 6 SCSI disks configured...
  4. yizhar

    PIX 520 Hardware Surprisingly Generic

    HI. Read this: http://www.packetattack.com/frankenpix.html Some notes: The FLASH card is probably the main issue here. It will also prevent you from upgrading to latest pix IOS. The pix does not support the newer Intel NICs. The NIC chipset must be: 82557/8/9 but should *NOT* be: 82550 (As...
  5. yizhar

    Problems with pptp passthru with PIX 501

    HI. > We recently got 3 PIX- 501's. I am trying to set it up in 3 locations all having a DSL or Cable internet facility The cable/ADSL device might be also doing PAT which may add complexity and problems (2 NAT devices in a row: the pix and then the DSL router). All of the following commands...
  6. yizhar

    PIX 515 upgrade to 6.3?

    HI. > The single "fixup protocol pptp 1723" command available in v6.3 looks to be best route for my situation. I'm not sure if it supports more then a single PPTP tunnel - try to connect from several internal hosts at the same time to check. This documents does not specify a limit...
  7. yizhar

    Newbi needs help - Pix 501 and Ping

    Note: The last link (Handling ICMP Pings with the PIX Firewall) is an old one using the obsolute "conduit" command. However it also includes the newer "access-list" command. You should use access-list commands, for example: access-list fromoutside permit icmp any any eq...
  8. yizhar

    Newbi needs help - Pix 501 and Ping

    HI. > Please, help me out here. In my opinion, the PIX should let it through since I'm initiating from the inside? You're logic is good, but the pix implementation of ICMP does not work like TCP so it is not working the same way. What devices do you have between your PIX and the ISP...
  9. yizhar

    ActiveX & PIX

    HI. Using PDM or the "filter" command, you can specify a rule not to block activex for specific ip addresses, then block all the other. I did not try that but I think it would work. An alternate and maybe better (more control) solution is to implement a proxy server for filterring...
  10. yizhar

    Failover or Firmware upgrade

    HI. As far as I know, only the pix 515 UR version can work in fail-over. If you have the restricted version then I think that you'll need to upgrade it. Contact your Cisco dealer for details and your purchase opitons. > Feedback is requested, thumbs up or down to 6.3.3. It is better in many...
  11. yizhar

    Pix VPN Best practices Help

    HI. > would I put my IAS server on the 192, or on the 10 network The IAS is normally on the internal network (or DMZ if you have one), so if internal network is 10.0.0.0 then IAS will have 10.0.0.X > I tried the VPN client, but i was not able to connect to the gateway. By default, a VPN...
  12. yizhar

    PIX501 and MS ISA2000

    HI. Yes, that way it should work. You will need to use port forwarding because you have only a single IP address for both the pix outside interface and internal services (if you're going to publish them). The following links will help you setting it up: Using nat, global, static, conduit, and...
  13. yizhar

    FSMO

    HI. START - HELP Search for: FSMO Yizhar Hurwitz http://teachers.sivan.co.il/yizhar
  14. yizhar

    Insolvable network problems

    HI. What is your Internet gateway device (firewall)? How is it configurred? I'm asking because your issue might be related to false PROXY ARP configuration at the firewall - then the firewall responds to ARP on behalf of the server which can cause such problems. Try the following command on...
  15. yizhar

    Pix VPN Best practices Help

    HI. > I would try to start working on a setup using the 501 as a test, and using the Cisco 4.x client software. Good. I think that this is the best choice. For small business, I normally use Cisco VPN + XAUTH using their existing Win2000 server with IAS as a RADIUS server for user...
  16. yizhar

    BDC Cannot see DC

    HI. You should recheck the WINS configuration. Does all servers use the new WINS server (including the WINS server itself)? Use IPCONFIG /ALL on all servers to verify this. Does all workstations use the new WINS server? Can the remote BDC ping the WINS server and vice versa? If not, then this...
  17. yizhar

    CISCO PIX MRTG

    HI. At the pix, you should enable SNMP using either PDM or command line. You can limit SNMP to specific host. You can select POLL mode which is good enough for MRTG. Regarding MRTG itself, follow the instructions: http://people.ee.ethz.ch/~oetiker/webtools/mrtg/ Yizhar Hurwitz...
  18. yizhar

    Badly need help VPN XP->PIX506E

    HI. > And at this time I haven't the possibility to use the CISCO Client so it's not an option. Why? I think that using Cisco VPN client is the best way. Try posting your pix config (or part of it). See the FAQ of this forum for safe posting. You'll find more info and tips by simply browsing...
  19. yizhar

    Event ID 8003

    HI. These error nomaly relate to network disconnections. It is normal if you have a laptop that is connecting/disconnecting. It could be caused by a computer switching from standby to normal power. It could be caused by networking devices: HUB/SWITCH, Cabling, NICs, or simply a bad network...
  20. yizhar

    how simulate wan link?

    HI. If you need to practice VPN and ACCESS-LIST rules, then yes, you can connect both pix outside interfaces to the same HUB/SWITCH with any ip addressing that you wish. Bye Yizhar Hurwitz http://teachers.sivan.co.il/yizhar

Part and Inventory Search

Back
Top