Search results for query: *

List this question in the Norstar Forum and you will find some help...

I have a question for the MVP's that have chime'd in all good answer's as I work in a hospital too with bout 9000 users.Fortunantly our NUT BALL's are in anoter facility but if they in fact's are NUT's i would think there also pretty smart cause don't you have to dial 9 first???

Not Really ,what type off phones do you have 3904 type have a directory log you can use.

Trevatwork you are correct about opt11 an grd start trunks . It is very common in older PBX's. Stay on top of TELCO as they seem to Hew Haw around. Everyone has given you some good advice on this thread.

If you go off-hook with a buttset and get a dial tone they are Loop start, If you have to touch your test lead with agrd wire they are grd start. You will probably have to rebuild them as loop not grd.

I believe the answer would be No. Norstar you are correct. Maybe overhead paging for 1 area.

Buddy I think ATT got you on that one. Yes you would need a system like you have described to make the phone work. And you would need some DEEP pockets too. The question is how many employes will you have etc.Their are a many of small systems made by nortel example an 8x24.I would get your money...

He probably means a DTR card in 1 off your card slots. Build another phone on another tn and see if you get ringing

Try another phone of course,If that doesn't work do the MOV command in LD 11 and put it on another T.N.It sound's like you have a bad TN.

Both John's are correct- you must out the name in LD 95 and then do as a new. If not it will capture both names up to the max limit of 25 char.. Some times you can spell some crazy S### if you know what I mean. On the other hand OTM to me died 5 yrs ago.

Post this same Question again but do it in the Norstar Forum and I'LL bet you'll get a bite.

Chg your CLS- from DNDA to DNDD and see if you get caller I.D. on key 01.

Hey J.P. aren't the 3903s suppose to be at firmware 87 and the 3904s at 89??.

If that doesn't work try to chg your cls=to dndd,icda.I just had the same problem in my switch. I made the cls= dndd.

Try and chg your cls-tdd,ola,ira,icda,dndd

Go I.P wireless (2212)

thattekguy Just checked AHST files i do not have any ELAN error's The only problem I've had in the past is the Flash Rom card's in the processor's got jacked up, and the system won't switch over and had to buy new one's.

HASGRO, I have a OPT-81C with rls 4.5,call pilot,symp, sig servers, pentium processors and the whole nine yards, We have our system swapping every nite, and doesn't seem to cause any problems. FYI