Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. macsnail

    S8300LSP/G430

    Is there a route on your network between site 1 and site 2. check your router config
  2. macsnail

    TRANSLATIONS NOT UPDATING ON LSP'S

    Most common reasons LSP will not sync 1) Wrong software version (ie. main newer then LSP) 2) Wrong patches on the LSP they all need to match 3) Wrong size of memory selected for the LSP 4) Firewall blocking the translation ports 5) problem was with the lenght (size) of the MTU packets...
  3. macsnail

    What is the unix command to default an S8300

    The cd will not erase the S8300. You have to choose to install or in this case re-install the software load.
  4. macsnail

    What is the unix command to default an S8300

    power it up with the cd in already. telnet to it 192.11.13.6 on your pc: start run telnet 192.11.13.6 and you will get the window you need
  5. macsnail

    error/alarm escalation document

    This might be closer to what you want https://support.avaya.com/css/P8/documents/100010055 look at chapter 3
  6. macsnail

    error/alarm escalation document

    That sounds like the maintenance pages... do you have your documentation cd? in the maintenance portion it has all the diffrent types of alarms and how to proceed to fix them with escalation procedures per alarm
  7. macsnail

    error/alarm escalation document

    http://support.avaya.com/css/P8/documents/100013481 page 41 Is that what you were looking for?
  8. macsnail

    G350-S8710 Cant push translations accross to G350

    Call avaya they will patch your system so the mix matched software loads will sync. they will try to manually ftp the file over to the lsp meanwhile, depending on who you get will determine how fast it is resolved. i know the book says that the lsp must be greater or the same but i have only...
  9. macsnail

    G350-S8710 Cant push translations accross to G350

    Try pushing the translations over manually
  10. macsnail

    Phones dropping out to dicovering ip address

    double check the gateway is correct.
  11. macsnail

    TN2224B

    the phone keeps it in memory when you tti another station to it then that will be on the display. it is the phone not the pbx that does that.
  12. macsnail

    G650 Gateway Media Server batteries

    you can plug them in ac or dc... but there are no batteries you use.
  13. macsnail

    G700 reg to 8300 not to Clan like it should

    when you configured the server did you check the right lsp mode?
  14. macsnail

    Need some help on a DS1 board that is failing

    roll the transmit and recieve if it looks good with a loopback then bad without it the loopbacks don't care which is the transmit or recieve the cards do
  15. macsnail

    G700 won't register

    I don't know that I understood your problem correctly, try a change media gateway # and check to see the serial number is correct and matches the gateway that could keep it from registering.

Part and Inventory Search

Back
Top