Search results for query: *

you will probably need to get the vpn appliance logs to get a little more information. it could be h323 inspections or various other things. ACSS SME ACSS a bunch of CM CCNA Voice

I just tested on release 9 SP1 system and a call between sites used a license on the outgoing side but not on the incoming side so not sure what to think of it except what I say with my own eyes. trunk setup as SCN link. ACSS SME ACSS a bunch of CM CCNA Voice

Per the release 9 manual on licenses IP500 Voice Networking Licenses The use of private voice networking trunks between IP500 control units and other systems requires voice networking channel licenses within the IP500. This applies to H323 IP trunks configured on the IP500 including IP trunks...

they are now called voice networking. outgoing calls are the only ones that count against the license. ACSS SME ACSS a bunch of CM CCNA Voice

it will work. as log as it is under 32 installed port digital/analog/ip ACSS SME ACSS a bunch of CM CCNA Voice

some releases made you have a login code and some do not. normally its blank but some installers put one in. best to check and change if unknown. ACSS SME ACSS a bunch of CM CCNA Voice

this is normally because 5060 or 5061 are not forwarded to your ip office. the FQDN with port 5060 or 5061 will need to be pointed to your IPO and the other ports pointed to the One-x Server. I highly discourage using 5060/5061 with out a firewall between limiting traffic. also make sure you...

if its 8.1 you can set the time to update via sntp to a local server or a web ntp server. saves a lot of issues and time like this. ACSS SME ACSS a bunch of CM CCNA Voice

setup your stun settings on the lan1 or 2 tab. it doesn't have to run but you will need to put your public ip and port in there and that should replace the internal with the public ip. ACSS SME ACSS a bunch of CM CCNA Voice

you would need to bridge the gap between the 2 vlans with routable interface. if your data switch is layer 3 it can do it. if your router has the ability to do 2 vlan interfaces then do it that way. You can always just plug the other interface on the ip office into a port on the data switch...

agree with mforrence. ACSS SME ACSS a bunch of CM CCNA Voice

you will need preferred edition to do it this way. you used to be able on older release I think before the essential came about but now to do a meet me conference you need preffered lic. ACSS SME ACSS a bunch of CM CCNA Voice

you need to follow the installation manual. there is a great section on doing this word for word. basically install asa with a job to run nightly. setup the one-x config to pull that file and done. ACSS SME ACSS a bunch of CM CCNA Voice

this patch did work on the systems that i have put it on. ACSS SME ACSS a bunch of CM CCNA Voice

ftp://custFTP:KMVF3w1r@ftp.avaya.com/Guy/Patches/COPYVV/9.0.101.1_Windows.zip ACSS SME ACSS a bunch of CM CCNA Voice

avaya has a patch that fixes it. ACSS SME ACSS a bunch of CM CCNA Voice

I have also seen this. they also use a simple phone manager program to login as a user and set forwarding that way. I have come up with a few ways within the IPO to combat this. buy best practice is if it is accessible via the internet then all users, and admin accounts need non default...

The update to SP1 did not help the issue. Looks like a call to Avaya. ACSS SME ACSS a bunch of CM CCNA Voice

normally when I this it is a vpn appliance issue. some work better then others. ACSS SME ACSS a bunch of CM CCNA Voice

can you post a pic of your settings? ACE IP Telephony ACS IP Office