Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Dacurve

    860 and 8200 ink differences

    Ink for the 860 & 8200 are chemically the same. When Xerox developed the 8200, they found out that the yield per ink stick was actually a little bit higher than they put in their documentation.. so the 8200 sticks are a little smaller as well. But I'm a 100% sure they are chemically the same...
  2. Dacurve

    Phaser 780 need a gear

    The black and white gear definitely have a part number and can be ordered (although they are DC4 part numbers, they also fit the phaser 780.. ordering the complete fuser tray will be a waste of money and more expensive than you would expect). Xerox -has- to give you the partnumber if you ask for...
  3. Dacurve

    Phaser 780 need a gear

    I don't have service manuals handy at the moment, but hopefully this will help you out anyway. These gears are used as a mechanical fuse within these models, they are designed to be the first ones to break in that particular drive train. Tektronix never considered giving these gears seperate...
  4. Dacurve

    Swapping printheads and inks among Phaser models

    I'm a former Xerox hardware specialist. 840/850 printhead are practically identical. so are the 860/8200 printheads. ink was changed from the 840/850 but can be swapped out among these 2 printers (some color differences between the 2 machines though and they use different color lookup tables)...
  5. Dacurve

    Phaser 6200/Minolta 3100

    From the top of my head, press the back and info buttons during power on. This should bring you into diagnostics. Try printing some color test pages from within diagnostics, to rule out any problems with your IP Board. There might also be a dip switch on the print engine board to allow test...
  6. Dacurve

    8400 light stripes

    If there is a problem with the kick plate, you should see print quality issues in all colors. Not just one. This would be easy to tell from the diagnostics pages (which jet is blocked, or if there's another problem). Like TCouch said, if there is a problem with this plate, Xerox will replace it...
  7. Dacurve

    Phaser 850 15,003 Error, freezes in diag mode

    Do you have access to a service manual, or do you know how to adjust the printhead-to-drum spacing? It shouldn't be needed on the 850 or later models, but it might be worth the try. I know that just the heat of the printhead is enough to keep the drum on temperature, without the paper preheater...
  8. Dacurve

    N2125 Low Toner Message

    I think you replaced the cartridge too early, the counter may only reset when you put a new cartridge in the machine when there is a "replace" message on the front panel. Don't think it'll reset with a "low" message.
  9. Dacurve

    Phaser 850 15,003 Error, freezes in diag mode

    When you look on right the side of the machine through the ventilation holes, you should see the bulbs in the preheater flashing. -Are- they flashing, or are they on solid? I have had this once with a similar machine, one of the triac's on the power supply was faulty and causing the bulb to be...
  10. Dacurve

    Phaser 8200 jam 15.0.45 and jam

    Some more info on your errors: I've got a strong feeling that you might have taken the upper feed roller assy apart (by accident) and did not put it back together correctly when you were replacing the preheater. Did you try reseating these assemblies? 16,001.43: TCP_THERMISTOR_OPEN The...
  11. Dacurve

    Phaser 850 15,003 Error, freezes in diag mode

    15.003.44 - From the service manual: The drum heater is running away. Unplug the printer NOW! Verify that the vent on the right side of the printer is not blocked. Ensure that the drum fan rotates and is installed correctly. 840 & 850 do not have internal diagnostics like the 860 & 8200...
  12. Dacurve

    Phaser 8200 jam 15.0.45 and jam

    The phaser 800 series don't use a registration assembly & solenoid? Can you please be more specific as to where the jam is occuring? Do you perhaps mean the upper feed roller assy?
  13. Dacurve

    Phaser 860 Printhead

    I believe that in Europe printheads are only available for purchase by service personal eg trained and certified technicians. Why are you looking to buy a new printhead if the one that is in your machine now is still working? It will probably cost you close to 2000 euros/dollars if you are able...
  14. Dacurve

    850 ink purge time?

    A tech can not change the purge time. There are 3 types of purges on these machine. If after the first purge, you select the cleaning procedure again within a few minutes the machine will do a heavier purge. And if you do it again after that, an even heavier one. However, 1/4 of an ink stick...
  15. Dacurve

    Phaser 840 paper jam

    When you remove the paperjam and look at the stripper finger assy (lifts the paper from the drum), is this down or up? If down, this could possibly mean a transfix shaft problem and replacement of the drum transfix assy or a process motor problem. If in the up position, check the support foil...
  16. Dacurve

    Phaser 860 misaligned printing.. very bad

    Sounds like the x-axis motor isn't moving the printhead from left to right. (this could be a mechanical or electrical problem) I looked up the error code in the manual for you: Indication that the motor coil(s) is open or shorted, or the X-axis motor fuse has opened. Follow the procedure...
  17. Dacurve

    Phaser 780

    Sounds like your accumulator belt cleaner is stuck to the accumulator belt. This would cause the machine to only print black. The other colors are wiped off by the blade.
  18. Dacurve

    Phaser 8400...Printing from QuickBooks

    You could try the Xerox Docuprint NC60 or C55 driver from (www.officeprinting.xerox.com). This is, as far as I know, the only PCL 5C (PCL version 5, color) driver available from Xerox. It probably won't give you the extra options as print quality / tray selection / etc that you would get from...
  19. Dacurve

    Parts lists for 8-series Phasers

    For all the people that don't have access to service manuals, this might be a usefull link if you're looking for a part number: http://www.office.xerox.com/userdoc/P8200/8200_Web/partslist/
  20. Dacurve

    Phaser 850 DP out of alignment

    214-4595-02, xerox europe sends them out to customers for free. not sure about xerox in the usa though.

Part and Inventory Search

Back
Top