Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

N2125 Low Toner Message

Status
Not open for further replies.

rschus

Technical User
Feb 26, 2004
8
0
0
US
I have a Xerox N2125 that started flashing the "Low Toner" message. Only have about 1300 prints on a new high yeild toner unit. Only have used Xerox brand units. Took this one out and rolled it back and forth a few times and powered down but other that I am at a loss.

Thanks
Bob S
 
I think you replaced the cartridge too early, the counter may only reset when you put a new cartridge in the machine when there is a "replace" message on the front panel. Don't think it'll reset with a "low" message.
 
No. The old cartridge was to the point that it wouldn't print. The current one only has about 1300 prints on it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top