Search results for query: *

Hi. We had such problems too. It was a channel issue, in Europe we have 13 channels (B or G-radios. We used channel 13 in some of our AP's and our customer have some laptops which could not operate with channels 12 and 13. (American models).

Hi. Is there anything on the console line. any error messages or anyting else?

Hi. There is a memory leaking problem in 12.1(9)EA1 caused by CDP, you can avoid it by disabling CDP. corrected image is 12.1(9)EA1a

Hi. Try to set up the trunk encapsulation to dot1q. Under the trunk interface: switchport trunk encapsulation dot1q The default encapsulation in 2900xl-models is Cico proprietary ISL.

Hi. Check these pages: http://www.cisco.com/warp/public/130/sw_upgrade_proc_ram.shtml and http://www.cisco.com/warp/public/701/61.html Good luck

Hi KY Try this (TeraTermPRO + TTSSH) http://www.zip.com.au/~roca/ttssh.html

Hi kevcrove. Yes you can use access filters. Here is an example: access-list 20 permit 192.168.0.1 line vty 0 4 access-class 20 in password xxxx line vty 5 15 access-class 20 in password xxxx Access to vty lines is allowedonly from ip address 192.168.0.1. You can also use...

Hi lowj. I'm not sure if there is a time based shutdown command, but still you can use time based access-list. So you can let the traffic go in and out due the time of the date. Her are some links: http://www.cisco.com/warp/public/793/access_dial/10.html...

Hi Saeed42. Try to do it like this. int dialer 1 dialer map ip 192.168.2.2 name "name" class dialer1 "number" ppp callback accept map-class dialer dialer1 dialer callback-server username

Hi htin11. Here is the link. http://www.cisco.com/warp/public/474/pswdrec_3600.shtml

Hi jnault! Check these files. http://www.cisco.com/warp/customer/129/config-bri-map.html http://www.cisco.com/warp/public/793/access_dial/ddr_dialer_profile.html http://www.cisco.com/cgi-bin/Support/PSP/psp_view.pl?p=Internetworking:ISDN&s=Implementation_and_Configuration#Samples_%26_Tips...

Hi jonks! Check thse files. http://www.cisco.com/warp/public/130/sw_upgrade_proc_ram.shtml and http://www.cisco.com/warp/public/701/59.html#conspeed Good luck.

Hi jasmjaso. You can´t use copy tftp://192.168.200.26/c2900xl-c3h2s-mz.120-5.wc2.tar flash: command with a file which have extension .tar. Tar file is a packed file like in unix systems. Use following command: tar /x tftp://192.168.200.26/c2900xl-c3h2s-mz.120-5.wc2.tar flash: Tar-file...

Hi. I think it is possible to speed up the connection to 115kbps with a set command. There are good documents on cisco's web, try these: http://www.cisco.com/warp/public/473/corrupt_or_missing_image.html http://www.cisco.com/warp/public/473/36.shtml#xmodem...

Trouble with writing config to nvram on LS1010. In our ls1010 ATM-switch I have tried to save the config to nvram and get en error message: startup-config file open failed (File table overflow) when I issue a command show file descriptors i got File Descriptors: FD Position Open PID...

Trouble with writing config to nvram on LS1010. In our ls1010 ATM-switch I have tried to save the config to nvram and get en error message: startup-config file open failed (File table overflow) when I issue a comman show file descriptors i got File Descriptors: FD Position Open PID...

Hi ash786. Try this. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/fun_c/fcprt2/fccfgfil.htm

Hi cjackson! If you are using NT-servers, they are very noisy. To avoid them opening your network you have to put an access-list in your dialer-interface. here is an example which removes "NT-noise" from opening the line. access-list 121 deny udp any eq netbios-dgm any access-list...

Hi GØAOZ ! Do you have a dialer load-treshold xx command in your routers config ( under int bri or int dialer ). If yuo have that might be the problem, issue a no dialer load-treshold. http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_r/drprt3/drhubddr.htm#4978 Hope...

Hi nichols! Try this one: http://www.cisco.com/warp/public/131/ppp_callin_hostname.html I think that you have to use different hostname or ppp chap hostname.