Search results for query: *

You said you were able to get the different numbers from each building on your cell phone. What you need to do is talk to the 911 center and ask them if they can update their records to indicate the "other" building when the ID comes through with that number. They should be able to as Billing...

You can also create a shortcut and leave it on the desktop, which runs the shutdown -r -t 0 I have had my machine setup that way for quite some time and itworks out well.

Sounds like this mnachine may have other problems. Certainly just installing SP2 should have had that much affect. It may be time to rebuild that thing with a clean install, with SP2. and then work from there.

Did you try doing a search for them? If they are jpegs just search the entire drive for *.jpg

you could also put both stations in a terminating extension group and use the group number for the night service ext. Both phones will ring...

So this was not a power failure scenario. That makes things different. If you have 2 switchs (for whatever reaason) and you have them connected to different providors. And the thing you want is to be able to swap them should you loose a providor. You should have the switchs tied together...

Yes I have the console cable. losing the config won't be a problem, as it needs to be reconfigured.

I have an access point 300 that we do not have the password for. (thats what happens when people leave) We need to know how to either get into this thing or reset it back to defaults. thanks

Back to donbots idea about setting it up in a speed dial list. Make sure that privledged is set y on the list.

A bridged appearance is only to the main call appearance buttons on another set. If I understand you you are trying to bridge to button 9 of set 5678 which is a bridged appearance from another set...THIS IS NOT POSSIBLE... if button 9 on 5678 is a bridged appearance of 7777, then what you need...

Why even have a mailbox if you dont want the user to recieve any messages? Eliminate it and you are all set.

You must also specify who is allowed. If they are listed on the machine as an administrator they are automaticly allowed.

Sp2 automaticlly starts the firewall. You will have to either turn it off or set the proper exceptions.

VNC might do just fine for your needs. http://www.realvnc.com/

You need to right click on the folder you want to share and set sharing.

If the system was under a avaya maint plan, they changed them on a regular basis. It will not be what you had on a r6.

Its not that they can't, they don't want to. You might try telling them you want another block of did numbers (shouldn't cost much) but they have to translate them and the existing ones that you have. You will want to work with your account rep, not the service group.

You probably also need a vpn client to establish a connection with the remote site. Can you even ping the address of the server you are trying to connect to?

You might also ask your providor if they will do the translations for you. Some will some won't. I have been lucky and have a providor that does them for me.

Bridged call alerting must be Y