Search results for query: *

Yes it is. Do you have the IPO plugged into a UPS? if not then you possibly have a power supply issue The end is 2 days away!

Don't forget to backup the MDB file and WAV files if your using modules. Just went through this upgrade and it wiped out all the modules. I even saved the VM folder as a precaution. The end is 4 days away!

Have you brought up monitor to see what exactly happens prior to the reboot and possibly post the results? The end is near!

So is this a new install or for some reason did it just started restarting out of the blue..? The end is near!

So I see there is a critical patch for 10.0.3 for the missed call log issue which the customer is experiencing. Never had to load a critical patch on IPO, is this loaded on Manager or embedded file mgmt...? The end is near!

That was it, thanks derfloh The end is near!

Just installed communicator on R10 and the msg indicator is highlighted, but when I click on MWI a box pops up as displayed below. Configured a short code on the user but does not work, what am I missing? The end is near!

So next time I see Bill Gates I'll kick him in the nuts, is that what your saying..? The end is near!

Ok so the upgrade went fine last night, but after the system came up after being rebooted, the display on the phones said "System Unlicensed" what I discovered was that I renamed the XML file exactly as the document said to PLDSkeys.xml but when I looked at that file on the Primary file of the...

So I upgraded a customers site last night from 8.1.85 to 10.0.3. We then discovered softphone didn't work and loaded Avaya Communicator. Seems to be working but I thought I would share a couple of screen shots, the 2nd screen is the Monitor SIP phone status and it says its using an Avaya...

Yes but you need to shut the SD down, file/Advanced/Memory Card Command/Shutdown The end is near!

The phone supports USB drives with FAT or FAT32 file systems and does not support USB drives with NTFS file systems and multiple LUNs. The end is near!

Now that I have new SD cards for the R10 upgrade, can I load the cfg file onto the new SD card prior to inserting it into the IP500..? The end is near!

You are correct azrael2000, if I use the new SD card, the host ID printed on the card has to match the number in the XML file The end is near!

Now I just have to figure out in PLDS how to change the Host ID # to the number thats printed on the front of the SD cards The end is near!

Tlpeter, I've never recreated a SD card to do an upgrade, always just used the upgrade wizard. If i can just recreate the SD card, pop it in the IP500 and reboot and then load the license that should save a lot of time. The end is near!

Appreciate that, I have the upgrade going on tomorrow night so it would be nice to know how that goes The end is near!

So not to hijack Azrael2000's thread, but I have 2 new R10 SD cards for a upgrade and the question I have is, if I use those SD cards does that cut down on the upgrade time..? The end is near!

I have a customer with IP500V2 8.1.85 at site A and 8.1.69 at Site B, the plan is to upgrade both sites to R10. Site A has a PRI that handles the incoming and outgoing calls for both sites, with SCN between the sites. It also has VMPro for both sites. The question is can I upgrade site B to...

UC Weirdness...I say we start another forum with that title!! The end is near!