Search results for query: *

is the trunk cross-connected to the local phone company's demarc?if so is there dial tone at demarc is the trunk being provided by your local phone company loop start or ground start? no problems only solutions strmwalker

just a question when changed the card did take the dongle off the old card and put it on the new card ? no problems only solutions strmwalker

i don't know about the drives because i get all the ones have from a nortel part vendor.the picture you are asking about are on the nortel callpilot cd's. no problems only solutions strmwalker

you need to hook the modem up to a laptop or terminal switches 1,3,7,8 down type AT&F0 (CR) RESPONSE SHOULD COME BACK OK. TYPE AT&B1&W0&W1 (CR) RESPONSE SHOULD COME BACK OK. POWER OFF MODEM TURN SWITCHES 1&4 DOWN. POWER UP MODEM. SHOULD WORK no problems only solutions strmwalker

if it is release 4.0 or higher is cut and dry it will run itself no problems only solutions strmwalker

how many times does the client let the phone ring before picking up they need to let the phone ring at least two times. no problems only solutions strmwalker

you start with white/blue,white/orange,white/green, white/brown,white/slate,then do the same with the red, black,yellow,violet.meaning the tip side is white,red,black, yellow,violet.then the ring side is blue,orange,green, brown,slate. no problems only solutions strmwalker

i just cut over a nuvox voxip circuit and i ran round for hours with nuvox saying the normal b.s. its just as GHTROUT said the trunk type is wrong a nuvox end make sure they have set correctly and they have something on their end they have to set for meridian or your trunks will not work. no...

i would ask the people that are saying calls are being drop?1 are calls drop during the conversation ?2 are calls being drop when trying to transfer the call or putting calls on hold?3 are the calls being drop all external or both internal and external?with that being said if question 1 is the...

look at your keycodes for callpilot and make sure it has NMS set for yes. no problems only solutions strmwalker

54745 error is you do not have full admin rights you need to login with full admin rights in order to change mailbox password.if you look at the alarm table and double click on the error codes it will give some info on what is going on. no problems only solutions strmwalker

alt,ctrl,del select restart pick a reason in the drop down menu for your restart and let it reboot. no problems only solutions strmwalker

alt.ctrl,del restart when it ask for reason select it from the drop down menu and restart now this is done at server level. no problems only solutions strmwalker

have you try what yyrkroon suggested changing calp from pos to ter and then test it? no problems only solutions strmwalker

settings for us robotics modems on NORTEL PBX start with the modem off: switches 1,3,7,8 down power on AT&F0 (cr) AT&B1&W0&W1 (cr) power off modem switches 1&4 down all the rest up power up modem no problems only solutions strmwalker

glad i could help no problems only solutions strmwalker

rj48 d15 1 -------------- 1 2 -------------- 9 3 -------------- 2 4 -------------- 11 5 -------------- 3 6 -------------- 4 7 -------------- 15 8 -------------- 8 no problems only solutions strmwalker

this is out of the mini carrier remote book rj48 db15 1 1 2 9 3 2 4 11 5 3 6 4 7 15 8 8 no problems only solutions strmwalker

you are a little behind with your peps your peps should look like this: CP50041SU05S CP500S05G16C CP500S05G17S CP500S05G23S CP500S05G28S CP500S05G29S CPSECPEPSP2S_V02 CPSECPEP011S CP500S05G01A CP500_DESKTOP_05.00.41.67 CP500_MYCALLPILOT_05.00.41.67 no problems only solutions strmwalker

if you are going to delete a mailbox make sure you purge it on change the password and delete all messages before you delete the mailbox failing to do so will leave all the messages on the hard drive taken up disk space. no problems only solutions strmwalker