Search results for query: *

I googled 'digital butt set' and found this...never tried it, so I don't know if it works or not...http://www.electronictoolbox.com/telephone_butt_test_set.html

I just saw this Denver news thread and immediately though of this thread! http://www.thedenverchannel.com/news/19121377/detail.html

I haven't been able to get the XFER key on my STEs to work yet either, but to get the CONF function to work, in LD 27, when you are building your TSP, make sure FEATID = AO6 60 60. Since your TSPs are already built, you will have to OUT and rebuild as NEW, then you will have to reboot the STE...

When I was a brand new pup in the military, my first install was a 1A1 in a aircraft fuels storage unit. We also had a 402 in a RAPCON. Our command post was a massive 1A2, and their "secure" intercom was a 1A system. Our CO was Stroger step-by-step. At the beginning of the Afgan war, the AF...

UILC cards are 2-wire, and the NT1 converts the circuit to a 4-wire S/T going into the phone. All ISDN phones I have seen require 4 wires. If you were using SILC cards, they are 4-wire, and then the NT1 would not be required.

Check out NTP 553-3011-311. Since you are using a UILC, you will also need an NT1 to convert from a U to an S/T interface. John

Ross, I am in Omaha too, and I am almost certain that Bellevue (Sarpy County) and Omaha (Douglas County) have seperate 911 call centers. John

Well, ACE, I guess AOSupport is having a bad day, huh?

CISCO must be an acronym for: Can I Spell Cost Overruns?

Hi all, I have found 2 phones that the call list works on. I have about 100 that it doesn't work on. All are version 8.9. I outed one of the phones that the list doesn't work on and copied a good TN to it...still no joy. I rebuilt a TN to match the working one, and, again, no joy. I just...

Triton, All I get when I hit the 'Callers' softkey is: Call Log 0 New, 0 Total Use Quit to exit I have outed and rebuilt the TN as well. I will try your suggestion in the morning when I come in. Thanks

Nope, no go again. I will keep playing with it and let everyone know what I find...it's these small things that keep us on our toes! Thanks.

Ace, that's what I do when my 'puter acts up too. Anyway, it didn't work. This is frustrating, because I am sure it is something simple!

big, I made the change, but still no go.

Thanks Bigindian, I'ss give it a try and let you know.

Thanks, ACE, but it is ON on the phone. Log options Log all calls Log unanswered calls New call indication On That's why I'm kinda stumped!

Ok, I am probably missing something simple. I have a CS1000, version 4.5. My 3904's are all version 8.9. I have CLT on button 27 turned on and can see 'Callers' on the display, however, the call log never logs any calls to it. What am I missing? Here is a sample TNB: DES 3904 TN...

Check out faq798-6219 posted by GHTROUT. It has some good tips as well.

I use OTM on site, and once I access the system terminal, I go to file and on the drop-down screen, select capture. The system will ask you for a destination or file name. Once you do that, simply run your report, then select capture again (to turn it off), then go to the file you named it...

Look here...I find this almost as helpful as tek-tips. http://www.pbxtechsupport.com/manuals/m125_4x.htm