Search results for query: *

Yes, you'll loose your system settings and have to re-program.

Nevermind - a little bit of time with wireshark and i find this: Element Manager: Port 5989 TCP BCM Webpage: HTTPS - Port 443 (duh!) BCM Monitor: Port 60001 TCP I've been playing around with this a bit and everything seems to work fine. Hope this helps anyone else.

Not sure on this, but I would think that you might have a problem with the System ID being different... So you take the drive out of the "other" (system B) and you put it into "system A" but it may not boot because the systemID doesn't match.... which would also mess up your feature keys (bound...

The simple answer is yes: F**266344 > userID is: 738662 > password is whatever you've set it to in the Element manager To set password in element manager: Connect, go to Configuration >Adminstrator access > Accounts and Privileges >Change the password in "telset password" i.e...

Hi All, Hopefully this is an easy question; which ports does the element manager use to connect to the BCM50? I want to use port forwarding to enable remote administration across the WAN. Thanks

Make sure that all voice devices on this line have filters... I've seen it before when 1 device is missed and then the DSL noise gets through to some or all of the other voice devices even though they have filters... Check; Alarm panels, fax machines, emergency phones (PFP], modems etc...

Zelandakh - maybe you didn't understand the situation. I'm not restoring from a backup because there is nothing wrong with the database and as far as I can tell it doesn't even need the log files to start (state is "Clean Shutdown" log required 0-0) So i'm not understanding why (or how) i...

yes been through that - no dice.

Hi all, I hope that someone can shed some light on this problem I'm having as I've spent a couple days no scouring the MS KB and such and haven't got a complete resolution to my problem. The problem was originally caused by the server running out of room on the hard drive array that exchange...

Arr- Sorry i'm not seeing that FAQ, can you post a link? thxs

The key is currently labeled "night service" (which enables line 3 to ring to 27 ONLY after it's been enabled) the key that enables the real night service is labeled "voice mail"... ahhg! soooo confused.. So anyways for the receiptionist to enable the "real" night service (i.e. answer the...

Hi guys, hope you can lend a hand on this one.. I've stumbled into a situation where i'm trying to re-program all settings into a system that was cleared after a power outage. 6x16 with Flash 2 They have manual night service that is controlled from DN21, but according to the receiptionist, she...

Depends where you are, and who's network.. Examples in my area: Bell Canada: 9582622 Sprint/Rogers: 5550311 Allstream: 311 hope these help.

That's already been done.. any other idea's?

Stupid question but where is that setting?

Ok, here's the deal 8x24 DR5 Flash 2 - Recently after an electrical storm / multiple power outages the flash stopped responding (tried power cycling, xftest etc. etc.) only after a very long power cycle did it decided to come back. Now when callers get into a mail box (fwd no answer) and try...

Maybe I have the wrong idea, but with my customers I setup their router with port forwarding & a host name (dynamic DNS if they don't have a static IP) i.e. Take the ip address of the CP (i normally set it to be .254 in whatever subnet... 192.168.1.254) and the port (web = 80) and forward it the...