Additionally, you may be interested in this site which list all current in use mandatory, voluntary area codes and programmed splits. A lot of good information here including individual CO prefixes (NXX's)
www.nanpa.com
I check it periodically to determine what, if any changes, will be...
Highlight the line that you want to synchronize.
One of the options on the menu bar at the top has Synchronize. YOu want to synchronize the selected line "TO" the switch (update the switch with the change).
Your MAT documentation should explain this clearly under user...
DID YOU SYNCHRONIZE THE CHANGE AFTER YOU MADE IT?
ALSO YOU CAN GO INTO THE TERMINAL AND USE LD 95.
LD 95
REQ CHG
TYPE NAME
CUST USUALLY 0
CPND_LANG <CR>
DIG <CR>
DN EXTENSION NUMBER TO BE CHANGED
NAME ENTER NEW NAME
<CR> UNTIL YOU RETURN TO REQ:
IF THE OLD USER WAS IN THE...
LD 20
REQ: LUVU (LIST UNUSED VOICE UNITS)
TYPE: 500 (ANALOG TYPE SETS)
TN: <CR>
PICK A TN FROM THE LIST. BUILD THE PHONE OR COPY THE PHONE TO THAT TN. CHECK THE 66/110 BLOCK WITH A BUT SET OR AN ANALOG PHONE TO MAKE SURE IT IS WORKING. COMPLETE THE BUILD BY DOING THE CROSS-CONNECT...
I assume that you are getting the LOGI and PWD prompts. The default PW is 0000. Other than that, you are going to either have to go to Northern Telecom or research the origin of the machine to try and get the password.
Wish I could be more help.
Many times, tech will write the password on the underside of the terminal keyboard. Is this system in service or are you preparing it to be placed in service?
The source of the system might be able to help you with the password also.
Good luck - you are going to need it.
Not knowing the application's particular's, the only thing that I can think of is to build an analog hunt group
FND and HTA to the next phone set in the group and have the last phone in the group point to the first phone in the group. Only one phone will ring at a time.
Drawback - if phones...
User set relocation - unmanaged - can create a real nightmare. I would suggest that you disable this feature. You can not trust user's to keep you updated on the moves and it makes troubleshooting a real problem.
Assuming that these are all digital phonesets, you might stat each DLC to...
I believe that you can list these mail boxes by last date accessed. However, the simplist way I have found to clean up mailboxes is to list the DN's by Name and DN in the PBX (LD 95) then list all of the mailboxes in the voice mail system and create a deletion list for the voice mail.
LD 14 - if SUPN is Yes - Change to NO and VIve Versa You may also want to play with the SIGL setting.. Also look at MODE in LD 16 - I believe it should be PRA
If I understand correctly, you have a multiple line digital telephone and you want a number to ring also on an alnlog phone.
If this is the case, you create a MIX by programming an analog TN with the same number, run the X-connects and connect a separate analog phoneset to the station jack.
I...
IF you are using Meridian MAil or Call Pilot, you must set up a voice menu that allows you to select options.
For Sales press 1 Now and the call is routed to a predetermined sales DN
You can also thru dial (If you lnow your party's extension you may dial it a any time) and a DIal By Name...
You should be able to, however you are going from 4 to 3 so you will have to modify the Route to decrease the route members (LD 14) from 95 to 71 if you are controlling all the T1's with a single D-channel or from 92 to 69 if each T1 has it's own D-Channel or from 94 to 70 if you have a back-up...
To print you RLI's use LD 86
REQ: PRT
CUST: 0
FEAT: RLB
To print the NPA's associated with each RLI use LD 90
REQ: PRT
CUST: 0
FEAT: NET
TRAN: AC1
TYPE: NPA
Why do you have a voice mailbox if you do not want caller's to leave messages.
Delete the mailbox and rebuild it as an announcement and rerecord the greeting.
Does a DID call to a set that does not ring on TRN or AOx ring normally? Answer normally?
Does the hold feature work normally when the TRN key is pressed once?
Can the call be retrieved in the following sequence TRN, dial Ext, RLS after 1 ring, LIne key caller is on or does it get...
Need more information, however based on what's provided, check LD 16 Build - TKTP, TRMB, PTYP, DTRK, IDC, DGTP, DSEL, CHTY and CLS and LD 14 Build - CLS UNR DTN.
Based on what you provided, I am assuming that internal station to station calls can be transferred and conferenced normally...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.