Search results for query: *

The Mitel 3000 was brought over from Inter-Tel world and personally I don't see why they didn't revamp the whole system. I can't see changing out any perfectly good 2 wire system to go back 30 years to a 4 wire analog. We are in limbo here where I work trying to find a CICS/MICS replacement...

yes you may Norstar phones with the Citel/Mitel Gateway...only seen it once and that was at Atlanta's Mitel Lab. Only time I have even come close to quoting one was when a 2 private schools wanted to be tied together...one had a MICS with new 7316 phones...ended up buying the phones and sold...

SX Wizard....He is asking about the Mitel 3000 key system that was adopted from the Inter-tel line. Not the 3300

Don't get me wrong...I love the little 3000. Be aware the 3000 phones are 4 wire phones....yes 4 wire...if you replace a CICS/MICS you will have to crack open every jack and rewire...redo all jumpers....change out every baseboard cord that isn't 4 wire. I have some customers that have cubicles...

Below is what I tried....however the the command is not valid when i type it as a Maintenance Command. Should it be done in the Shell Console? To disable SASTATS collection Enter DEBUG DISABLE SASTATS in the Maintenance Commands form.

Try....Display Held Call ID on Transfer....set to yes....on your VM port COS.

I have a trouble ticket with Mitel for an unrelated problem in which they told me to send them system log files....to my amazement they were 29 Meg(had to send via FTP)....most times they are 7 meg Tech support said I probably had some type of debug turned on....he wouldn't tell me what it...

I reinstalled just the blade and it has worked ever since.

Does anyone know if there is a log file that will show errors sending the Welcome Message? I have looked at everything that resembles smtp in log files with no luck...my gosh there are bunch of log files. I have email settings for each account...email settings for server. Just want to see why...

I have setup UC advanced 3.0.21.0. When I start the UC Advanced 3.0 Client it will work for about 25 to 30 seconds then it goes offline. It will connect and work again if I exit then restart....but only for 25 to 30 seconds. Any help would be appreciated.

amps? What do you mean? Valcom speakers are self-amplified. Do you mean page controllers? VP-2001 maybe. Mitel IP Page Units provide audio and thats all you need for Valcom.

Yes....Unknown numbering was it. Changed it in the protocal assignment. I was an NI2 North American. Thanks Bunches

My Long Distance calls aren't going through on a PRI...I am getting reorder at the Central Office like the correct digits are NOT being delivered....ive set up SMDR and watched the correct digits being delivered out...just looking for another avenue to watch the digits hit the d channel and on...

Can someone help me. I need to monitor the D Channel on Embedded T1/E1 on 3300 MCD 4.0 SP2. Does anyone know the commands?

I have a MP3 that I have converted to a WAV....now I need to change to 8hz,8 bit Mono...Alaw/Ulaw. I have tried windows sound recorder but the 3300 rejects. Any advice. Tried about everything I know to do.

Yes FCOS> 260-264 and 280

I have ran into this on several occasions. You need audio and you have it right in the phone. My solution has been to crack open the phone and strip out a small section on the wires leading to the internal speaker....get a butt set...ring the phone....you will hear the ring. Solder pair 1 of...

In order to prevent any other device except a Mitel IP Phone from getting an IP from the Mitel DHCP server, follow these steps 1/. Give your IP Address Range the following name: ipphone.mitel.com 2/. Enable the Client's class ID must match name option in the IP Range. This causes the DHCP...

kwbMitel...This is straight out of MAS 2.0 Install and Maint guide.......bottom of page 37 Program Message Waiting Indication You can program Message Waiting Indication to flash a lamp on a user’s phone when the user has a voice mail message waiting in their mailbox. There are two possible...

I am using DTMF signaling because this is a clustered....HCI is supported only on 1 MCD. You can configure the system to use DTMF signaling to send the message waiting indicationto the voicemail port. This configuration supports multiple MCD network elements in acluster, but requires an...