UC Advanced Client 3.0 goes offline

[Wythefan]

I have setup UC advanced 3.0.21.0. When I start the UC Advanced 3.0 Client it will work for about 25 to 30 seconds then it goes offline. It will connect and work again if I exit then restart....but only for 25 to 30 seconds. Any help would be appreciated.

 

[EPearson]

Re-install Server.....It worked for me

 

[RDECIT]

If you search for this you will find my post worded nearly exactly the same and with exactly the same problem. After a lot of testing and fiddling, most people suggested re-installing. In the end I gave in and re-installed, and it worked fine second time round. I can't explain why, it just did!

 

[Mitel100]

Hi Guy's, came across the exact same problem today. Shame I didn't see this thread before.

I can ask, did you re-install the MSL and then the Blade, or did you just re-install the blade.

Regards

__________________________

There is no 'I' in 'Team'
__________________________

 

[Wythefan]

I reinstalled just the blade and it has worked ever since.

 

[tomcotton]

Could I run the UC 3.0 client on a 2.1 server???

 

[Mitelpassion]

nope