Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Monitoring D Channel on Embedded PRI 3300?

Status
Not open for further replies.

Wythefan

Technical User
May 20, 2009
32
US
Can someone help me. I need to monitor the D Channel on Embedded T1/E1 on 3300 MCD 4.0 SP2. Does anyone know the commands?
 
In the Help Files under EDT

Without knowing what you are looking for, I can't be more specific.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
My Long Distance calls aren't going through on a PRI...I am getting reorder at the Central Office like the correct digits are NOT being delivered....ive set up SMDR and watched the correct digits being delivered out...just looking for another avenue to watch the digits hit the d channel and on to the CO...(Just a little CYA) before I tell the phone company off. Local calls are fine.

Looks like EDT TRACE VDSU VB is what I need...any more help would be welcomed
 
Assuming North America

Assuming NI-2 Protocol

Try Unknown Call Type.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
Yes....Unknown numbering was it. Changed it in the protocal assignment. I was an NI2 North American.

Thanks Bunches
 
I'm overly impresssed with myself this time. Ouch, hurt my arm patting myself on the back.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top