Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. mikeg826

    Trouble with Off-pbx FNE

    there is no reason to call the Idle Appearance first - the FNE should work from your cell, but to activate EC500 direct from your desk - you can either dial the Feature Code ( page 2 of change feature) or press the ec500 button on the phone. >mike ACE - IP Telephony
  2. mikeg826

    cdr link is going down while using reliable protocol "n"

    what is the Call accounting software? >mike ACE - IP Telephony
  3. mikeg826

    Fax over IP on my AVAYA CM 6.3 System

    nope - you'd be using h.323 instead of SIP - hopefully the attached works. ACE - IP Telephonyhttp://files.engineering.com/getfile.aspx?folder=dc4038ec-7c87-4c02-9684-2cd58fd30a4f&file=Configuring_Mediant_1000,_2000,_MP-11x_H.323_in_Avaya_CM.pdf
  4. mikeg826

    Call Server adrdesses manual settings

    you can only manually set one IP address. When the phone register, it should get it's MGC from the Communication manager (depending upon how you have it set up, you can set this in the ip-network-region (page 2) >mike ACE - IP Telephony
  5. mikeg826

    Fax over IP on my AVAYA CM 6.3 System

    I believe the MediaPack supports h.323 as well, you should be able to configure a port on the MP as a FXS and H.323 . http://www.audiocodes.com/filehandler.ashx?fileid=39009 >mike ACE - IP Telephony
  6. mikeg826

    Sorting Public Unknown Numbering Table

    if you have ASA, run a report and save it as a .txt file, than open the report in excel. At this point you can do a sort on the column for CPN >mike ACE - IP Telephony
  7. mikeg826

    Modify text displayed at receptionist console

    change listed-directory-numbers >mike ACE - IP Telephony
  8. mikeg826

    EC500 Programing

    Have the off-pbx config set to PBX on Calling Number Style than, this way the internal extension is sent to the EC500 cell phone. >mike ACE - IP Telephony
  9. mikeg826

    EC500 Programing

    Do you want the ec500 user to see her own extension? Don't think that is possible, the PBX sends the format of the calling party either as network or PBX (where internal extension calling the ec500 will send their extension number) . I generally turn on confirmed answer, this way when you...
  10. mikeg826

    NEW Call Park & Page

    with the Park and Page, you don't use the Park button, you simple use the Call Park and Page - press this and the system will provide the 1xx number you can call from any phone to retrieve the call. >mike ACE - IP Telephony
  11. mikeg826

    Button-press-extension removal

    Tried this a couple years ago to see if anyone had this issue, but no luck - figure I'd circle back as I'm cleaning up the PBX a little. I have an extension in my PBX assigned as a "button-press-extension" In the past, In pre 5.1, this was programmed via the "off-pbx FNE" section, but since...
  12. mikeg826

    Placing call on Hold options

    chief0222 - Thanks for this! been going crazy trying to find this. >mike ACE - IP Telephony
  13. mikeg826

    96xx DHCP Vlan

    as Kyle mentioned - add the vlantest=60 to the end of the scope, and it will reset to the native vlan and grab the new voice vlan. >mike ACE - IP Telephony
  14. mikeg826

    T1 not syncing with telco

    who is the provider? what type of switch is the CO ? >mike ACE - IP Telephony
  15. mikeg826

    Park Button stays on IP500V2 9.0.200.860

    easier now IMO - dial 3-digit code (or what ever you decide) and you unpark it - don't need the button on all phones, or hunt for where someone's park button is, and can be picked up from a analog the same as deskphone. ACE - IP Telephony
  16. mikeg826

    Park Button stays on IP500V2 9.0.200.860

    Never liked the Call Parking in the IPO, until this release - Been converting all my sites to use the "Call Park and Page" feature, as I don't have to worry about slots - just set a range and let the system assign the slot. and the unparking is easier as well. >mike ACE - IP Telephony
  17. mikeg826

    Avaya IP phones DATA & VOICE VLAN issue

    MattKnight is right, you need to tell your phone that it's proper vlan is 210 , so on next reboot it will go to vlan 210 and get the full string, the phone doesn't need to know anything about the datavlan. ACE - IP Telephony
  18. mikeg826

    Avaya IP phones DATA & VOICE VLAN issue

    just noted i missed the L2Q=1 in the code example for option 242, it should be there ACE - IP Telephony
  19. mikeg826

    Avaya IP phones DATA & VOICE VLAN issue

    Change the data DHCP scope to the following: DATA VLAN 176 HTTPSRVR=x.x.208.15,L2Q=1,L2QVLAN=208,VLANTEST=60 242 HTTPSRVR=x.x.208.15,L2Q=,L2QVLAN=208,VLANTEST=60 The 46xx phones should use the 176 scope, not the 172 . Removing the MCPIPAdd makes sure the phone won't register with with a...
  20. mikeg826

    CDR information on VDN and route-to

    That didn't work - What I'm looking to do is trace the call from when it hits my PBX and than gets routed off-site - i.e phone number 555.1212 called in , entered vector and select state PA, which routed caller to suboption of 4 choices, caller selected option 3 and is transferred off-net...

Part and Inventory Search

Back
Top