Call Server adrdesses manual settings

[Latya]

Hi! We have CM 6.x. We like to change DHCP server to manual settings on the IP extensions ( All IP ext s 9650 C) . In DHCP server in the Option 242 -in tis moment- there is 3 IP ADDR for Call server: 1 for main server, 1 for ESS, and 1 for LSP. If I set the phone by manual, there is only 1 IP ADDR for call server. How can I set the other 2 call server addr?

 

[mikeg826]

you can only manually set one IP address. When the phone register, it should get it's MGC from the Communication manager (depending upon how you have it set up, you can set this in the ip-network-region (page 2)

>mike


ACE - IP Telephony