Search results for query: *

Thank you both for clarifying this.

The data vlan is default vlan 1 - ip range 10.1.1.0 The voice vlan is vlan 10 - ip range 10.1.10.0 DHCP server is in vlan 1. DHCP relay (ip helper address) is set on the switch to forward DHCP request from vlan 10 to vlan 1. When a request is received by the DHCP server from Vlan 10 he has to...

Customer wants the following sollution: DHCP server in Vlan 1. When DHCP request is received with VLAN tag 10, it is relayed to the DHCP server and an IP@ is assigned from the scope reserved fro vlan 10. Can anyone explain to me which DHCP options I have to assign to the scope, to asiign the...

I have had this simmilar problem when the IPO is setup with '0' for trunk access and using analogue phones with autodial option like Siemens DECT phones and faxes.

do you have any specific requests / subjects ?

I think the avaya doc cd is very good. you can download all IPO docs and apps form the support.avaya.com website.

Unfortunatly I now little about networking. Avaya advices to setup VLans on the LAN, one for data and the other for voice. But more importantly have you setup DCSPs for the voice source and destinations IPs or the correct ports on the procurves? show qos is the syntax in CLI config mode. If the...

Check the source numbers on the extension!!

Open manager and then Help. Search on 'paging' in the results you'll find two results. paging via analogue trunk port and paging via analogue POTS. It will give you details on the configuration and more importend on the wiring and pin connections.

JeSTeROCK, Do you by anychange know or have experience with if there is a limitation to the the number of actions you use VMPro and memory used like on the INDeX IVM? For instance when you use a large amount of Q-actions it the callflow couldn't be too large, which would cause slow call...

You can't. IP Office does not discriminate between internal and external calls on diverts and coverage. That's a feature the IPO lacks.

It will only ring ones when HfAns is active. Why is DND not acceptable if I may ask? Maybe you can do a feature request at Avaya for that beep option.

you always need the new manager to change anything in the config to avoid corruptions. Always install the latest apps from the apps cd.

I read something of a 'dead air on transfer' as a fixed issue in Tech Bulletin 46 on the release of 3.0 august maintenance release. Read it and ask your vendor if this will fix the issue on your site. Or you can simply test it by upgrading.

If you want it to work on the whole system including on diverts, try/test programming a SC with .W (depening on outgoing access) on the SC tab on the Line(s). If you use a user SC and divert your extension to an outside number, the SC is not aplied.

No, you just can't use the DT ports anymore

groupname" doesn't work. Use groupnumber when using pickupmembers

Do you have a dect integration licence? You need the dect integration licence to realy 'twin' two devices

I've had the same issue last week. Use group number!

Red flag at the icon means that queing is enabled for that group. Have you created the correct feature button or shortcode for to pickup calls for that group or groupmembers?