Did some reverse engineering in the meanwhile and found what I was looking for!
Here's what I found
To delete a personal directory entry for a specific number, type -> deletePDRLCL 0,"XXXXX",1,1,1,1 in the vxshell.
Where XXXXX is the extension number
To find out how many PDRLCL are...
Hi,
just follow this document http://downloads.avaya.com/css/P8/documents/100120057
The files must be names screensaver0.jpg, scrennsaver1.jpg and so on.
Also take care that the resolution is exact the one of the display.
Hope this helped
Hi there,
does anybody know the syntax in the vxshell to delete personal directories for ip phones?
Due to a migration I need to delete hundrets of them in one step!
Thanks in advance!
So the simring feature works?
And you want to call into your system and make calls, is that right?
What about printouts of your system?
Have you made the PSTN route to an MobX route?
What about the DCH programming?
Did you set the outgoing T306?
I think you forgot to set this timer because the two following release messages come immediately after the disconnect (4 sec)
I would recomment to set it to OUT_T306 = 20, INC_T306 = 0
Then you should hear the busy tone of your...
Because Rls 5.5 supports context sensitive keys for IP phones, that means you only get the keys/functions offered that are available in this call state.
Hope this helps!
Hi there,
I had a similar problem. We updated the deplist (CS, SigServ and VGMC) and the problem dissappeared. There are a couple of patches against speech path problems on 4.5
Hi Brandon,
I am quit surprised that somebody decided to change to a global Siemens SIP solution.
For your problem the DAPC feature could be helpful. It allows to add digits in front of an incomming CLID depending on the NPI and TON of the call.
The feat. is programmed in LD 15 CDB and LD 16...
Hi Phil,
I had a test installation and a similar problem like you. Apart from some strange behavior of the MCS in combination with the CS1K, the users denied to use this application.
I presume the potential users are still playing with there game consoles (ICQ, Skype Generation) at home. We...
Hi John,
Nortel self offers TM3.2 to configure the System via PC.
And there is a company in Switzerland that sells applications that do the same and even a little more (auto DSC programming within a CDP network).
The product is called ATIRAS, SIGMA or SIGMA+ another product is Thomas and it...
The feature you are looking for is called Personal Call Assistant. You have to buy PCA Licences and it will work from Rls.3.X on.
Just refer to the manual 553-3001-306B3 (Features and Services)
Since 25.40B a feature called DNDR (Directory Number Delaeyed Ringing) is available. This enables SCN keys to ring after a specific time. The time can be set on a per set based parameter DNDR in seconds.
Maybe that causes your "problems".
It's no BUG it's a feature.
+ I would recomend to enl the dch monitoring in ovl 96.
There where some helpful tools mentioned in this newsgroup that will help you decoding the level 1 messaging.
It's alway god to compare one god and one bad call with this tool. That'l show you the difference.
Hi if you are using EURO ISDN you can refer to the NTPs feature description MCID (Malicious Call Identification).
But that feat has to be enabled at the CO as well. With a kay push at the console it will print a ticket on your tty and in parralel in the CO the number gets printet even if it is...
We had the same probelm.
Just get the newest patches or SU's for the CP and the newest version of app.builder and it works.
I guess that solves your problem 99,999%
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.