Search results for query: *

I see you have Call Transfer denied (XFD) in CLS. I've had problems with MFP transfering to a common op/attndt #. XFD ( denied ) in CLS sends the call to the op/attndt,changing it to XFR (restricted) causes it to not forward..

We have a Public Safety/Inform 3.1 system. CLS, and Inform and SC servers and 5 loggers/NCF3's. When we do a search in Reconstruction , the calls show up in the result window. When we click on them to playback, a red x shows up and a error saying " Server return no audio for this call" I look in...

With our Nice system. Under System Admin there is Call Logger retention. Two choices, Do not delete logger calls based on age or yes delete them if calls are older than ( 1-999) days old. We have three servers, CLS, Inform and Storage Center. You can not setup Call Logger retention if you do...

I'd say as long as the Pri's are the only way you receive inbound calls you should be ok. Recording the ties would only create a duplicate recording. One on the inbound PRI and another for the tie line call to either the Nortel or Rockwell. If you want to record calls between the Nortel and...

I do know that any calls recorded when CLS is off/down will end up in the Inserter table. I'm not sure about disabling the Inserter job. If you can, login to the CLS server console and look at CLS manager, it should show the status of what's running ( Inserter is one of them )

Upgraded BCM50 to 6.0 and voicemail message lites on previously configured i200x phones do not work. Any suggestions ?

REQ: out TYPE: sl1 TN 156 0 0 26 SCH5783 TN SCH0120 TN ! >err sch0120 > SCH0120 Wrong number of input fields for prompt TN. Severity: Info It can't be outed as a I2002, I2004 or a SL1

More info: Printing TNB with either type IP phone (I2002 or I2004 ) gives me the same error. REQ: prt TYPE: i2004 TN 156 0 0 26 DATE PAGE DES KEM_RANGE SCH0807 REQ: ! >err sch0807 > SCH0807 TN is valid but unable to match type. Severity: Info

I have IP phones on Virtual loop 156 on a option 61 running 4.0 When I print the TNB for one phone it shows a type of SL1. I can't delete it as a I2002 , I2004 or SL1. DES PPPP TN 156 0 00 26 VIRTUAL TYPE SL1 CDEN 8D CTYP XDLC CUST 0 KLS 0 FDN 5600 TGAR 1 LDN NO NCOS 5 SGRP 0...

Stopping the 5 loggers is not a option. When CLS / Inserter is started after the patching is done wouldn't the inserter see CLS is running and put the calls into the call DB and not the inserter table ?

Thanks for the info. When we patch, we reboot the server twice. Before the server is booted the first time, I login to CLS and stop CLS. I think I'll change CLS so it won't auto start. When they are done patching and reboot it for the second time I remote in and change cls to auto start. That'll...

During MS patching on the CLS Server we stop CLS. During this time Inserter runs and puts the calls into the Inserter table . Is there a way to stop Inserter from running until the patching is done and CLS is back up ??? Nice has two options. Live with the calls in the inserter table or delete...

We have two NRS's, one is primary and one is alternate. We also have approximately 30 Quintum ATA's that register to the NRS using SIP. When the primary NRS fails or loses network connection everything should (we think)register to the alternate NRS. All of our Nortel CS & sig servers will...

I login to the PBX via Rlogin using a script, once I connect I run the NEWAC1 script. transmit "LD 90^M" waitfor "REQ " transmit "NEW^M" waitfor "CUST " transmit "0^M" waitfor "FEAT " transmit "NET^M" waitfor "TRAN " transmit "AC1^M" waitfor "TYPE " transmit "NPA^M" waitfor "NPA " transmit...

I tried that, It kicks me back to the REQ prompt in the PBX.

I have a small script that adds new NPA's in approx 25 pbx's. Once in a while the NPA is already in the database and I get a ESN072 error. transmit "LD 90^M" waitfor "REQ " transmit "NEW^M" waitfor "CUST " transmit "0^M" waitfor "FEAT " transmit "NET^M" waitfor "TRAN "...

I am trying to get a Quintum AS setup using SIP. We have 3 working via H323, but would like to get SIP working. Can anyone share their Quintum config ? The NRS show that the quintum is registered, but when i do a CMD SIP STATUS on the quintum it says the primary registrar 10.x.x.x is not...

Are you naming the backup you are attempting the same as a existing BU on the PCMCIA ? Try a different name and see if that works .

KODR, when you mentioned loops, I got out the Aspect script language book and researched loops. Got it going!! Thanks for pointing me in the loop direction!!

I added my script as shown: ;Recorded script. Editing may be required. proc main integer Loops = 0 ; Integer used to count loops. transmit "^M" waitfor "TYPE: " transmit "^M" waitfor "TN " waitfor "^M" waitfor "ECHG " transmit "yes^M" waitfor...