Search results for query: *

have done it , you should have no problems

you need a headset status button, and a hangup button in central programing

go central program put in your console sta , then look at what the lights show , look for green , which you will touch read the display just dont hit enter , if the light goes out ,touch again to put the light back on, what is the feature ? then go the other station that are ringing and do...

actually with the console you have you do not need to enter any codes slide switch to p (program ) touch conference 2 times in the display should show something like system, lines , centel , and more with the buttons under neath as the choice the data and programing is kept in the...

yes its probably controlled under follow me, there must be a button lite on the console to control it ,see what you find in your manual about how to set it up , it made be under groups But MM idea to put in a release Legend 7.0 is the best way to go, I upgraded my last 2 Merlin 11 in the mid...

thinking back its been a while to change the ringing , is thru the system programing, it was slide the switch down to p touch the conference 2times, them i believe the first intercom is for telephone programing button and the second is for system , read your display when you locate which one...

on the left side their is a slide switch, slide it down to the p ( program ) touch a line button dial * 37 ( ring ) to all lines , then return switch to center position *36 is delay ring *35 is no ring

you can try the gpa but it may not have the volt to push it that distance, as long as it is a BIS set, no HFAI sets you can also if it is a Bis on a legend you can wire a 48V transformer at the phone jack on the white green pair , using your blue & orange pair to use in the 2 good feed pairs...

I suspect one of the modules is having a power issue, trying to diagnose is hard unless you are there to see which module is loosing power before the system goes down and reboots, but it is a crap shoot ,some time the Partner PC diagnostics in the Partner PC Administration program will show it...

did you check the loop current ?

it looks like someone has posted a message from 7131 to those stations and using the return call feature if I remember right. try and find a manual to explain its been to long, the other I remember is #751extension number of the posted message but it is the personal posted message sorry can't...

check your stations in calling group 1 for feedback *70 IS paging and members of CG 1

In a key system you have no pool ,that is why you get the error 70 pool = 9 ,in a key system you use the line or trunk using 801 to 880 that you using to dial out, Forward : trunk (using 801 to 880 Programmed for principal user ) destination number and then the #

it's been years since I've done it , i believed the incoming line needs to have a principal user assigned & delay forward at the extension , and in the Key system you use line number 801 or what ever trunk 808 destination number and the #

forgot to tell you make sure you take off auto backup after to not get a backup error

no problem , put it in do your backup , take it back out

I ran into with one of my customers calling that when they change their provider from Verizon to Time Warner , the time would change time to a 6 hour time difference , with the first call in ,after she would reset Called TW , oh not we don't do that, asked for technical help and got an...

Have you checked the Verizon side , look at their lines and hunt group

Question what type of centrex lines are these if they are loop start what TTT says should work, if they are ground start then it will not. when you put a call on conference call ,you cannot hangup, for a digital phone you would put the call on hold (hope you don't have MOH ) on a single line...

your system is in pbx mode but you can switch to behind switch mode,for centrex but I can tell you now you won't like it