Search results for query: *

Huh - this comes from Siemens Enterprise UK (ex Plessey)

DX LLABC2566 Site Identity 27072.01 Site Serial Number for FRU service 01.030 Configuration issue 9.2.081 Software version /01DHL System details 0001000 Variant HL 13 Territory/tones 03/03/06 Config. build date A Active...

If it is a fixed mobile number then why not RFD to the mobile. That way you can control the type of calls to divert. You will need to alter SNVL to 2 each time you want to change and if V9 then divertee type (eg. E for external) must be declared - this prompt is not requested just stick it on...

Does the LED light up when you reverse polarity??

However, you will notice that for 2 = LED's it says iVM only which means that it will only work with Siemens own internal card and not an external VOXBOX. This statement is NOT Correct - iVM only infers that Lamps will not work for Hotel Message Wait. Have you checked that Message Wait is...

Time of day is in 24hr format You can check extension status from the operators console - dial the op assist code plus the extn number from the console and the display will show any features invoked by the user.

MEX (move extension number) will only transpose the extn number, it will not move TAC & COS or anything else that may be assigned eg text, forwarding etc

I would use the TRQM command

Contact your maintainer or Siemens. The Version 9 upgrade processes remain the same as for upgrades to Revision 8 for those systems at Revision 7 and below. For those customers already at Revision 8 the application pack upgrade process is used.

In Australia the RUCF command can be used at Versions 6.2 & 7.1 - all that's required is the downloading of a patch.

How do you know it is RNR diverted - What have you tried so far to remove it?

I would say that your Media Card needs to be reformatted. If you can DIR 1.0 I think you will see some extremely large (hence corrupted) files and the only way around this is to reformat, you can not delete these files. Make sure you have back ups of neccessary files before doing anything.

Set up a specific TAC (trunk access class) that allows what you want then assign that TAC to the required extn

There is a system parameter that changes the divert to VM timer but it is system wide and so all allowed phones would divert after 3 rings if changed to that. TMRIV - RNR redirect to iVM after all other RNR forwarding has been resolved ie TMRI1 etc.

Can only be done by MMI then RFD extn n

Networked ACD is only available from Revision 7 software as part of the hotdesking/homeworking set up If you are working true DPNSS then you should be able to put remote extn into a Hunt Group

Normal cabling is OK just be careful if putting anything across the pair as the circuit is fused.

I have sent you a PM via another forum

I would use digit translation myself In the RL table (LSSP SPRDT), translate Acc Code+07 to New Trunk Main Group Access Code+07 and Bobs your uncle

Hot Desking & Home Working was introduced to the iSDX/Realitis range at software revision 7.1.001 so au upgrade would be the easiest way to achieve Home working for multiple users