Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
iSDX SCA - Configuration advisor
- Thread starter Stoney64
- Start date
speckledhen
Technical User
What are you looking to programme, what version of isdx?
- Thread starter
- #3
Contact your maintainer or Siemens.
The Version 9 upgrade processes remain the same as for upgrades to Revision 8 for those systems at Revision 7 and below. For those customers already at Revision 8 the application pack upgrade process is used.
The Version 9 upgrade processes remain the same as for upgrades to Revision 8 for those systems at Revision 7 and below. For those customers already at Revision 8 the application pack upgrade process is used.
- Thread starter
- #5
Hi DXcomms.
This is not to upgrade the software.
The SCA is a programme (DX System Configuration Advisor) that you load your PABX system file - HRM into. The SCA will then highlight potensial problems on the PABX such as power problems on shelves,DSC concurrent connections,BHCA Busy Hour Call Rate,DCH Common Channel Signalling, etc.
Thank you.
Cheers
This is not to upgrade the software.
The SCA is a programme (DX System Configuration Advisor) that you load your PABX system file - HRM into. The SCA will then highlight potensial problems on the PABX such as power problems on shelves,DSC concurrent connections,BHCA Busy Hour Call Rate,DCH Common Channel Signalling, etc.
Thank you.
Cheers
- Status
Similar threads
