Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. DUCTAPE

    MICS 7.1 Page Zone "NO CHANGE"

    thread799-1295408 New Install & for each phone the paging zone was set to zero and the "change" soft key wouldn't move any set to another paging zone. Any ideas would be great, thanks Another #48 win?????
  2. DUCTAPE

    CP 150 no exts w/ 11XX???

    Found that if you check the tick box "enable user interface" you can then change the name and spec prefix. Not sure what "enable user interface" does? When you change the name and spec prefix to 71/72 what else does that change other than allowing us to create the exts. 11/19, 110/119, 1100/...
  3. DUCTAPE

    CP 150 no exts w/ 11XX???

    ok, went to sys prop page and found the name and spec prefix and it will not change! I tried 71,71,21,22,29 89 91,92 ect. just won't change to anything diff. Another #48 win?????
  4. DUCTAPE

    CP 150 no exts w/ 11XX???

    Great! Thanks for all of your help! I will post my outcome when I return.....thanks!!!!!!! Another #48 win?????
  5. DUCTAPE

    CP 150 no exts w/ 11XX???

    Thanks, have laptop, what do you need to change to use exts. 11XX?????? MW2 needs new Maps....ASAP
  6. DUCTAPE

    CP 150 no exts w/ 11XX???

    thanks for your suggestion, but "no dice"! went back to the site & installed again, F983, press 2 : Pri Lang, Sec Lang, Grp List, Lead Dig, CP UI, Sys Config. No option to change name or spec prefix????? uninstalled & went back to Flash vm. this is a CP150 3.0 any ideas????? MW2 needs new...
  7. DUCTAPE

    When check VM remotely it keep asking for extension

    Little more info...are you wanting to get to a mbox from the AA? Did this used to work and now it's not working the way it did before? Does the ext# have pswd entered in Mngr under User/Vmail tab? Is it a prob for just 1 ext. or all exts? MW2 needs new Maps....ASAP
  8. DUCTAPE

    When check VM remotely it keep asking for extension

    * option in the menu is set for owner access....might be it... MW2 needs new Maps....ASAP
  9. DUCTAPE

    IP Office - Won't play customised queuing announcements

    3.2 no tick box or tab for announc....Queing On, tick box...in VM Pro goto Groups... ADD, paste gr. name, must be exactly the same...select Queued....brings up start point...as tlpeter said use generic or menu will work.....note...if the menu has options for the caller's to press...
  10. DUCTAPE

    Help with voice mail set up

    In the menu programing go to "selector code" modify "1" to be a "direct extension transfer" this will send calls to extensions starting w/ 1X. Do the same for "2" if you have exts 2X and same for 3 ect.....should work for you... MW2 needs new Maps....ASAP
  11. DUCTAPE

    Embedded VM - Remote Access to HG Mailbox

    Right-on.....I have'nt spent much time here at this site, but after reading through some of the posts.....WOW, alot of GREAT knowledgable people here helping others in a bind.......I just started viewing the IP Office forum the other day.....I've been missing out!!!! I have used this site before...
  12. DUCTAPE

    Embedded VM - Remote Access to HG Mailbox

    Maybe this might work...if Customer has caller ID....enter msg checker's callerID into an incoming call route, destination to short code or menu w/ owner access option......I've used this before for the same situation....had a lady needing to check msgs @ the office from home every night....same...
  13. DUCTAPE

    Move ContactStore to new server

    NICE Matt!!!!!!!!!!!!! MW2 needs new Maps....ASAP
  14. DUCTAPE

    IPOffice 400 Digital Station Expansion Cable Pinout

    Thanks Tom, looks like shielded is gonna be the best bet!!!! MW2 needs new Maps....ASAP
  15. DUCTAPE

    IPOffice 5.0.18 w/ IPO 400 DS 16 Module

    I just benched an older 3.2 mod and pointed the dir to 3.2.999... went to upgrade and does'nt even give a tick box to upgrade to 3.2.999....just upgraded right to 4.2 or 6.2 I should say.... MW2 needs new Maps....ASAP
  16. DUCTAPE

    IPOffice 5.0.18 w/ IPO 400 DS 16 Module

    Should'nt need to point at 3.2.999 for just a module at 3.2.53.... BD diff. story....needs to realocate memory on proc. MW2 needs new Maps....ASAP
  17. DUCTAPE

    Move ContactStore to new server

    Copy C:\Program Files\Witness\calls\XXXXXX.....should have all yor calls in it..... MW2 needs new Maps....ASAP
  18. DUCTAPE

    IPOffice 5.0.18 w/ IPO 400 DS 16 Module

    Yes, upgrade all to the same version....in your case your 400 DS 5.2.53 translates to 3.2.53, upgrade w/ 5.0.18 Mngr will then show 7.0.18 MW2 needs new Maps....ASAP
  19. DUCTAPE

    IPOffice 400 Digital Station Expansion Cable Pinout

    Wow, that sucks, I hate that....and it happens all the time..."nothing honest"....Installed a job for an ecenomic Baptist Church last week...they got all there expansion modules fr. Metro and none of them came w/ shielded patch cable....must be alot out there w/ the wrong cable....what issue...
  20. DUCTAPE

    Upgrade SOE to 4.2.23 and now there is echo on SCN calls

    Is this a prob that just started out of the blue or is this a new set-up???? MW2 needs new Maps....ASAP

Part and Inventory Search

Back
Top