Search results for query: *

If you are running under release 4.0 you cannot get this even with the MiBS, i use a solarwind app for SNMP monitoring and aside from reboots, nic up/down, CPU, RAM thats it. In 4.0 there is a whole bunch of stuff you can get, but, you need to turn on the trap for the specific events to be...

Have you tried to use the i2050 config tool and where it show's the hardware id (MAC address looking thing) click the "auto generate" button a few times to give it a new ID? Feature ** RLS: The feature code to fix annoying phone calls :)

Hey There, We have a need to block a phone number from calling in to us. The telco say cannot do it from their end so Looking to do this from our switch. Is there a way using CLID routing or somthing like that with routes/destinations so that if a specific CLID rings in I can just sent it to...

Cook1082 is correct.. I learned this lesson the hard way.. It’s got to be SIP to SIP or H323 to H323 to have the 2 BCM talk ”peer-to-peer” without some type of MPCU in between them. VOIP GW Trunk key codes is an H323 protocol. Feature ** RLS: The feature code to fix annoying phone calls :)

1) You would need an SNMP monitoring application setup on a PC/Server on the LAN the BCM is on. 2) Configure SNMP setting and enable on BCM (See BCM Docs) 3) Mostly likely have to download the MiB files from Nortel to add on the SNMP ability (or instructions) to your chosen SNMP monitoring...

So I have reviewed the documentation for the BCM: How Dialing Translation works Unfortunately this is only ½ the answer… While I could manipulate the digit values I cannot specify the line pool to use, so I’m still in the situation were voicemail is grabbing a PRI channel and dialing the 4...

Hi All! I have a few networked 400 BCM 3.6 with VoIP trunks networked. Toronto 2xxx DN range Montreal 4xxx DN range Edmonton 6xxx DN range Guelph 5xxx DN range All locations can direct dial each other, works great! Now, to the voicemail... Let use Toronto as the example, this issues is...

I had a similar problem using the IE 8 Browser. I used fire fox and it worked.. Chalked it up to a browser problem.. because it was OK before when I did it from IE 6.. Feature ** RLS: The feature code to fix annoying phone calls :)

It's currently NI and Allstream is NI(1) as well. Options are: NI, DMS100, DMS250, 4ESS, SL-1 Feature ** RLS: The feature code to fix annoying phone calls :)

If your hard disk is dead I pray you have a recent back up! You will need to purchase a replacment 3.7 hard disk from a nortel partner, install, restore the backup. If you have no backup you will need to re-setup all the application feature (Voicemail, VoIP, Call Center). Set programming is...

Ahh, I understand. Unfortunately with a shared switch it's all or non on the current hardware you have. Seems like the path of lease resistance is to just remove them name, Good Luck! Jason Feature ** RLS: The feature code to fix annoying phone calls :)

No, there is not.. I've been searching since the Enterprise Edge days and nothing yet... :( (For BCM 400) That I have found.. Feature ** RLS: The feature code to fix annoying phone calls :)

I forgot, I'm on a BCM 400 Rlease 3.6 - This might have changed when they went to Element Manager.. The location to set the business name, that is. Feature ** RLS: The feature code to fix annoying phone calls :)

Anyone step in and and correct me if i'm wrong: While the telco can set the same if you have PRI you can set the Business Name (The Default outbound name display) from: Telephony Service -> General Setting - [Business Name] Note: he business name will be dispaed for ANY outbound call across...

I have a BCM 400 Release 3.6 with 1 PRI Module and PRI service from Allstream for a full DS1 (23B+D). (yes, I know, Allstream AND 3.6.. but it's what I have to work with :) Soo.. The PRI is configured on BUS 7 with the following T1 Parameters: CO fail: TIA-547A Interface: ISDN Framing...

Ok, So, relatively new to Cisco hardware here (yes, laugh now ;-) ) but I'm not new to networking or it's concepts! I bought an 851W and factory defaulted the system using: router(config)# config-register 0x2102 router#write erase router#reload And this did a great job, totally factory...

Thank you both (bluemr2,DBrewsky)for your answers! Feature ** RLS: The feature code to fix annoying phone support problems!!

Would you know from what version of RCC and were on the PC? I've looked everywere in the: C:\Program Files\Nortel Networks\Reporting for Call Center Directories and cannot find them and there is no start menu items for this.. Feature ** RLS: The feature code to fix annoying phone support...

RCC Reporting for Call Center Hey Again! Is anyone out there in possession of a: "How to read and interpretate RCC reports" Guide / PDF / Book.. I really don't know if the RCC system is pumping out garbage or not w/o a guide to figure out the reports. The confusion is one report say...

Hi There! I have a BCM 400 (3.6) with 20 VoIP Trunks & 31 Active i2004 and 3 more client license to go. I rebooted today and happed to open BCM monitor after the reboot to noticed that of my 20 VoIP lines i thought i'd normally see in the BCM monitor, I am only seeing 9. (see image) I see...