Search results for query: *

Initiating a follow me from our MD110 BC12 sp8 to the mobile provider via DPNSS costs about 5 seconds. Normal follow me to internal position or to a PSTN destination is done within a second. Does anyone know a method or a setting to speed up this delay? ROCAP ROU=84 SEL=7110000000000010...

The Tabs-server is initiating a FTP session with the AAU. After changing IP-address and putting a firewall between Tabs and the AAU, FTP is not working anymore. Telnet gives no problems. FTP traffic fails after a period of time. Message from the firewall "Port command ended without new line"...

Hi, Use a delayed hotline, than a person with an authorisation code can make a call and a non authorized person will be forwarded to the programmed destination. This programming is all possible within Extension Manager Harold

Thanks, (NT) looks good, is in line with the other Nx code's but (NA) Call handled by operator is the same as (A)? Mayby is (NA) - Dialled party is not the answering party on a transferred call from the operator. I will test this first thing in the morning

The condition code is the key element in the call record. It designates the type of call that was made. Typical condition code's are for example: (A) Call handled by a PABX operator (I) Incoming call or tandem call (J) Internal call (NI) Incoming DID call when the answering party was not...

When analyzing the CDR's i find two condition code's i can't find in the documentation. NA and NT are not discribed but in case of the NA code it appears quit often. Who knows what these code's mean? My system is a BC10 with CNI142. Harold

Try login "sa" with no password You can test this in the ODBC configuration or by using MS Access and via File, Get external data, Import or Link and connect via ODBC to the SQL-server. Harold

It is working fine with the welcome message in combination with a ADN but: The ADN keeps on ringing and never disconnect's the line. The calling party hears nothing anymore after the message. How can i solve this problem???

Sorry, your scenario will not work, a new call goes always to the common queueu and stays there as long as there is an active operator. In your case it is better to forget the operator and use a normal phone like the dbc213 and put this phone in a personal number list (or IRD list). The second...

Hello MD6 What is exactly the problem? Instead of the condition code you can use the accescode = 20 mentioned in the string: 03202033 0001 20 2580 5868486466 Because the orig is the incoming route you are sure that this is a Trunk to Trunk call Harold

This is correct, outgoing calls do not have a conditioncode. (except calls via LCR) If you want to make a selection to see what the traffic is over the CAS you can use Trunk or Accesscode This is a copy from Alex: Condition code (type of call that consists of one letter): ( ) Outgoing call...

PPM or TRREP can both be used to read the TRAF of a measurement. With the TRAF parameter you have in a certain way the percentage of used lines. Put these measurements in a Graph and calculate the TRAF of a 30 or 60 channel ILP. You can use the Erlang calculator on www.erlang.com. Put this line...

To my opinion is the LCR option not the right one, it is not the purpose of LCR to block numbers. Call discrimination can be used for this problem using the NACDS command to filter out the number to be blocked for example, number to be blocked = 0676075030 program this with NACDS ... 067607502...